79 Mechanical Technician jobs in South Africa

• Diploma or degree in Mechanical Engineering or Mechatronics.
• 3 or more years of experience
• Experience in a product development lifecycle, from concept to prototype.
• Ability to use 3D printing equipment and additive manufacturing tools.
• Understanding of materials science (metals, plastics, composites).
• Knowledge of pneumatic, hydraulic, or electromechanical systems.
• MS Excel (Advanced), MS Word (Advanced), eDrawings, Microsoft Dynamics NAV.

• Prototype Assembly & Modification
• Machining & Fabrication
• Technical Interpretation
• Design & Testing Support
• Test Execution & Data Collection
• Troubleshooting & Diagnostics
• Design Iteration Collaboration
• Workshop Maintenance & Safety
• Experimental Setup & Instrumentation
• Material Sourcing & Inventory Management
• Documentation Contribution & Redlines

Mechanical Technician

Duties & Responsibilities

• Perform mechanical routine maintenance on plant equipment, including boilers, turbines, generators, and auxiliary systems.
• Conduct regular inspections of mechanical equipment, identifying and reporting any damage or potential issues
• Execute preventive maintenance tasks to ensure optimal equipment performance and longevity
• Repair or replace faulty components using correct spare component, with proper appropriate tools and techniques
• Develop and implement effective solutions to equipment malfunctions under the guidance of engineering
• Respond promptly to emergency situations and equipment failures
• Monitor and analyze equipment / component performance to identify areas for improvement
• Implement modifications or adjustments as instructed by engineering to enhance system efficiency and reliability
• Adhere to all safety protocols and procedures in the plant
• Conduct regular safety checks on electromechanical equipment
• Maintain up-to-date knowledge of relevant codes and regulations
• Ensure compliance with environmental regulations related to plant operations
• Perform Tag Out/Lock Out procedures as per company guidelines

Desired Experience & Qualification

_{Minimum Qualification and Technical Requirement}

• Matric and practical course completion (Red Seal)

_Experience

• 3-5 year' s post apprenticeship experience in a similar environment.
• Plant and Equipment knowledge
• Maintenance procedures knowledge
• Ability to trace and troubleshoot problems
• ISO standards (quality, safety and environmental)
• Knowledge and experience with Occupational Health and Safety Act
• Report Writing
• Excellent Communication skills

Education and Qualifications

• Grade 12 / N3 Qualification
• Qualified Artisan Trade Tested (Fitter and Turner/Millwright/Hydraulic Technician)
• Drivers License: Code 8 minimum

Responsibilities

• Perform routine maintenance tasks on machinery. (Hydraulic, Pneumatic and Mechanical).
• Conduct fault-finding and repair issues in a timely manner. Strong judgment/problem-solving skills.
• Ability to read and interpret mechanical, pneumatic and hydraulic design drawings and specifications.
• Able to read technical drawings and specifications
• Skilled in fitting, aligning, and repairing motor/gearboxes/pumps.
• Prioritize jobs and breakdowns effectively.
• Take initiative to maintain plant operations.
• Ensure preventative maintenance schedules are up to date.
• Previous experience working with injection moulding and assembly operations advantageous.
• Experience gained in a manufacturing production environment, advantageous.
• Extensive knowledge of Hydraulics and Pneumatics fault-finding and installation
• Functional mechanical, pneumatic and hydraulic testing of special machinery functions and circuits to ensure it meets the intended design functional specifications.
• Sound understanding and knowledge of valve controls and functions thereof.

Attributes

• Maintain a clean and organized work environment.
• Ability to work collaboratively as part of a team.
• Integrity and honesty.
• Effective oral and written communication skills.
• Operate within safety regulations and maintain high standards in housekeeping and organization.
• Tolerance for stress and ability to work under pressure.

We are searching for talent!

At Sappi, we are a leading global provider with a reputation for delivering high-quality sustainable Woodfibre products and solutions for the global markets. We lead through our values centred around safety, integrity, courage, making smart decisions which we execute with speed. We are seeking unique people who believe in fostering a diverse and inclusive and safe environment.

We’re on the lookout for experienced Mechanical Technicians to assist the Maintenance Engineer and Foremen by carrying out OHS Act legal compliance statutory inspections and tasks, various mechanical project work, maintenance tasks, technical investigations, and management tasks.

As a Mechanical Technician, you will be responsible for:

• Drawing up/updating technical specifications/procedures, Capital and Renewal applications and enquiry documents
• Adjudicating quotations and being part of the selection of the successful contractor.
• Managing Capital and Renewal projects.
• Updating plant mechanical drawings in consultation with the plant Foremen.
• Carring out technical investigations/feasibility studies and investigating maintenance problems, producing reports containing detailed recommendations and changes to maintenance plans.
• Providing specialist maintenance skills (SME - Subject Matter Expert) to section (in terms of specific plant and equipment where basic mechanical skills and particularly knowledge are lacking).
• Fault finding on plant and equipment not performing to OEM specifications.
• Fault finding related to plant and equipment causing production stoppages or reduced capacity throughput.
• Working without direct supervision but keeping the Engineer fully informed as and when necessary.
• Assisting with plant breakdowns where necessary, providing support to plant Foremen, managing sections pending situations, and also carrying out/performing standby duties.
• The coordination of all statutory inspections (e.g. structural inspections, pressure vessel inspections, pressurised system inspections, etc.).
• Observing company safety policies and procedures under OHS Act and IRCA.
• Utilising all Sappi's systems in the execution of the maintenance strategy and realisation of the objectives.
• Assisting the Maintenance Engineer with the preparation of the maintenance budget.
• Executing work on shuts.
• Supervising work being done during shuts.
• Investigating the root cause/s of frequent failures and/or high-cost maintenance equipment where solutions are derived and implemented.
• Identifying and executing cost-saving projects.
• Doing plant inspections and performing lockout audits.
• Assisting in reviewing and optimising existing maintenance schedules.
• Assisting in developing maintenance schedules on newly installed equipment.
• Developing Best practices/QCPs for the maintenance activities.
• Doing Mill Wide Mechanical Technician standby duties as and when required.

What are we looking for?

• NQF6: N. Diploma / NH Dip. Mechanical Engineering.
• 3-5 Years of practical experience.
• Pulp and Paper Industry experience is advantageous.

What’s in it for you?

• Opportunity to work within a global organisation that continues to thrive in a rapidly changing world even after 80 years of existence.
• Learning and development programmes to fast-track your career within Sappi.
• Opportunities to travel (dependent on the role).
• Market-leading leave benefits.
• Employee wellbeing benefits.

If you are resilient and energetic and looking for a new challenge at competitive market rates, click on apply now to put your name in the talent pool.

We are looking for a skilled Electrical and Mechanical (M&E) Engineer to join our team in Pretoria. As part of the role, you will be responsible for overseeing the design, implementation, and maintenance of mechanical and electrical systems across various projects. Key responsibilities include coordinating installations, interpreting technical drawings, conducting site inspections, and ensuring compliance with regulatory standards.The ideal candidate will have a National Diploma or Bachelors Degree in Mechanical or Electrical Engineering, with at least 3-5 years of relevant experience. Familiarity with design software and a solid understanding of local codes and best practices are essential. Registration with ECSA is advantageous.If you are proactive, detail-oriented, and have a passion for ensuring high-quality engineering solutions, we would like to hear from you.

Location: South Africa, Gauteng

Company: Siemens Energy (Pty) Ltd

Organization: Transformation of Industry

Business Unit: Full-time

Experience Level: Experienced Professional

The Mechanical Fitter performs precision inspections, repairs, and assembly in the Workshop/Service Centre on steam turbines, high-speed compressors, gear assemblies, and related equipment for the power, gas, and oil industries.

• Carry out equipment inspections, repairs, and assemblies according to detailed checklists.
• Adhere to manufacturing and testing guidelines, processes, and procedures.
• Contribute to production planning, determining priorities based on schedules.
• Ensure tools and equipment are handled and maintained with care.
• Develop, manufacture, and source special tooling required for turbine and compressor repairs.
• Maintain the health and safety of employees, plant, equipment, and buildings in accordance with company policies.

• Valid Trade qualification as a Mechanical Fitter or Fitter and Turner or relevant equivalent tertiary qualification.
• At least 10 years of hands-on experience in a workshop/service centre on high-speed centrifugal compressors, steam turbines, high-speed gear assemblies, and related auxiliary equipment.
• Experience includes removal and fitting of turbine blades, dismantling and assembly of shrunk wheels and impellers, and repair of high-precision auxiliaries.
• Knowledge of assembly and repair of turbo machinery, compressors, turbines, and related auxiliaries.
• Ability to read and interpret engineering drawings.

Our Transformation of Industry division is focused on decarbonizing the industrial sector, increasing electrification and efficiency, and supporting the transition to sustainable processes with green H2 and derivative fuels.

With around 100,000 employees in over 90 countries, Siemens Energy develops future energy systems, ensuring reliable and sustainable energy supply. We are committed to innovation, decarbonization, and supporting a diverse, inclusive workforce.

• Opportunities to work with a distributed team
• Opportunities to lead innovative projects
• Medical benefits
• Paid holidays and parental leave
• Continual learning through the platform
• Access to employee resource groups