10 Quality Assurance Specialist jobs in Benoni

Parts & Spares Quality Control Receiving Inspector – East Rand We are looking for a Receiving Inspector with heavy machinery (Mining & Construction) parts experience. The role involves inspecting and verifying parts against drawings / specs, using verniers, micrometers and measuring tools; receiving containers and handling documentation Working hours: 07h00 – 17h00 (may vary when required) Minimum requirements: Heavy machinery parts experience and Quality Control background is preferable Able to interpret technical drawings Attention to detail and strong admin skills Flexible in terms of early / late work times when required Salary offer: Negotiable

Operations

Accountable for specialist outputs, as well as initiating quality standards within defined work routines and policies.

Job Purpose

To ensures effective quality control through the verification of scales and incubators, execution of the manufacturing start up procedure, efficient packaging analysis and inspections.

Key Accountabilities and Outputs

Verifications

Daily verifications of scales and incubators

Manufacturing Start UP Procedure

Check that the skew bar is set at the correct height, the barcode stickers and coding on bottle have the correct information and is legible

Check the torques on all capping heads

Check that labels conform to spec

Report any non-conformances to the Line Supervisor and QC Supervisor

Authorize the line supervisor to proceed once start up results have been passed

Packaging Analysis

Testing of preforms

Testing of blown bottles such as height, burst pressure, sectional weight, stress cracking, fill point capacity, drop test, visual inspections, wall thickness, base weight, neck finish dimensions

Testing of closures such as height, skew cap detection, outer diameter, inner seal

Label Inspections to ensure the application is correct

Testing of labels for glue application

Rinse reside tests

Inspections

Inspection of the Date and Batch code applications to ensure it is legible and correct

Rinse pressure Inspections

Inspection of barcodes to ensure correct and legible application

Documentation and Record Keeping

Recording of all results

Raising non-conformances to the QC Supervisor

Sampling

Ensure that the correct number of samples are taken for the relevant departments such as QC, QA, Retention and Micro

Adherence to the Quality, Food Safety, Health, Safety and Environmental Standards

Adherence to Standards: Ensure strict adherence to Quality, Food, Health, Safety and Environmental policies and standards.

Enforcement: Enforce all food safety and health regulations, policies, and requirements at all times to guarantee a secure work environment.

Personal Hygiene: Maintain exceptional personal hygiene as per the organizations code of conduct.

Contamination Control: Raise awareness about potential physical product contamination and implement control measures to prevent it.

Health and Safety Measures: Take reasonable precautions to prevent health and safety hazards. Follow the prescribed incident reporting procedure in case of accidents.

Knowledge and Compliance: Stay updated with relevant business information, policies, processes, and procedures. Enforce compliance with legislative and statutory requirements, as well as GMPs (Good Manufacturing Practices).

Training: Attend and enforce the implementation of learnings from training sessions related to Quality, Food Safety, and Health and Safety.

Housekeeping: Maintain high levels of cleanliness and orderliness within the work environment.

General

Responsible to ensure housekeeping is performed and ensure that all products and activities are stored and are executed within the demarcated areas according to the housekeeping policy (green red and yellow areas)

Conversant with relevant business information, policies, processes and procedures

Maintains expected performance standards

While Job Descriptions are written up for the purpose of a basic outline of the work and responsibilities associated with the Job, the Company encourages and expects all employees from time to time, to assist with work that may not be a direct part of their job description

Qualifications and Experience

NQF 5 National Diploma in Food Tech, Biotech or Analytical Chemistry (Essential)

Upto 3 years experience (Operational Execution) FMCG; Bottling Equipment

Basic MS Excel; MS Word; E Mail

Key Qualities

Communication

Routine communication in connection with instructions, requests or normal work tasks

Problem Solving

Proactive identification of problems that are concrete and procedural, troubleshoot and apply solutions in line with guidelines provided or escalate more complex problems to superiors, providing information required to solve problems.

Relationships Maintained

Others outside of own work area but inside the organisation

Quality Control Technician

Able to communicate verbally in a logical manner.

Takes the intended audience into account when communicating verbal information.

Makes use of appropriate business language in verbal communication.

Includes all relevant information in verbal arguments.

Demonstrates proficiency of language in verbal communication.

Interprets complex information to expresses own viewpoint in verbal communication.

Concludes verbal arguments by making reference to relevant facts

Decision Making

Organises information to make it easier to analyse or see trends.

Anticipates consequences and formulates alternatives.

Establishes clear decision criteria for making informed choices.

Seeks relevant information to better understand situations and problems.

Conducts appropriate analysis; neither makes snap decisions or over-analyses.

Sees relationships between various facts, figures or other information.

Continuous Improvement

Increases performance expectations when success has been achieved

Seeks out sources of information, including trade associations, best practice companies, customers, peers, subordinates, etc.

Finds ways to fast-adapt improvement ideas to work processes

Proactively seeks out resources, alliances, etc., needed to quickly introduce improvements

Collaboration

Helps others with their work.

Meets commitments to team members or others in the organisation.

Actively contributes to team discussions and the accomplishment of team work plans.

Shares expertise and resources to help others address their needs.

Seeks to include all those who can contribute to the most successful outcome and those who have a stake in the results.

Actively keeps all stakeholders informed.

Attempts to reinvigorate team processes when progress is lagging: stays engaged even when not in full agreement with the teams direction.

Accountability

Accomplishes assigned tasks and goals: takes necessary actions to keep progress against objectives on track and prepares a roadmap for success.

Ensures that all who need to know, are clear about the plan.

Takes full responsibility for own actions and outcomes, including mistakes.

Always acts in the companys best interest, regardless of whether it is difficult or unpopular.

Ensures others are on track for achieving their goal.

JOB PURPOSE

The purpose of a Quality Control Checker is to conduct quality checks on branded garments and verify whether it is aligned with the requirements of the job card as well as company standards

JOB OBJECTIVES

Quality check samples

• Review swatch and samples and verify if it is branded according to job card specifications.
• Escalate to supervisor in case of discrepancy

Quality inspection of branded goods

• Conduct random quality audits on branded items as production is running. Escalate quality issues to QC supervisor

Fold and Repack

• Responsible for folding samples neatly
• Responsible for repacking and sealing samples in the correct boxes.

QUALIFICATION

• Grade 11 / 12

EXPERIENCE

• 2 years quality checking experience

SKILLS

• Product Knowledge
• Branding processes
• Attention to detail
• Interpreting a job card
• English Proficiency
• Process following

COMPETENCIES

• Execution
• Reliability
• Assertiveness
• Systematic approach

Job Description,
We are seeking a detail-oriented and proactive Quality Control Inspector to join our team. The successful candidate will be responsible for conducting quality control tests, ensuring that raw materials, in-process components, and finished products meet quality standards and customer specifications. This role plays a critical part in maintaining product integrity, safety, and compliance across the production process.

,
Requirements
,

Required Qualifications/Experience

• National Senior Certificate
• 2 - 3 years experience in Quality Contol within a Manufacturing environment
• Knowledge of Quality standards and systems
• Strong attention to detil
• Analytical Skills
• Problem Solving Skills
• Organising Skills
• Decision Making Skills
• Presentation Skills
• Communication Skills
• Troubleshooting
• Creativity
• Use of tools/instruments
• Hande-eye coordination

,
Duties and Responsibilities
,

Quality

• Testing of raw materials (sand, paint, polymer, and steel)
• Verification of Certificates of Analysis of raw materials
• Verification of paint components
• Accessory Forming Quality Control Inspections
• Tile forming Quality Control Inspections
• Metal pre-treatment testing
• Monitoring and testing of In-process and Finished Products conformance to specifications and customer requirements
• Identification and reporting of non-conforming products and raw materials as per works instructions.
• Defects identification, reporting to relevant parties and recording as per works instructions.
• Chemical Stock Management
• Ensure calibration and verification of measuring equipment. Maintain the Calibration Register
• Raising NCR's, Deviations and Concessions
• Ensure SHE (Safety, Health, and Environment) and housekeeping compliance.
• Reports any SHEQ incident / accidents immediately as per the SHE system.
• Uses / ensures the PPE required for the specific tasks or working conditions are used by subordinates.
• Performs tasks assigned in the SHEQ system

Operational

• Comply with work rules, standards, and methods. Take care to minimise waste. Identify and provide feedback on cost saving initiatives within area of control

Stakeholder Relations

• Provide specialised technical / professional support to internal and external stakeholders to ensure achievement of functional and organisational objectives.
• Build, support and maintain interpersonal and team relationships to ensure stable working environment and achievement of team objectives.

Governance, Compliance and Risk Management

• Adhere to statutory regulations, organisational standards, policies, and procedures. Report non-compliance and implement corrective actions to ensure compliance.

Cargo Commercial Vehicles Airport currently has a vacancy for a Quality Controller. Reporting to the Service Manager, the primary purpose of this position is to manage the workshop to its full potential.

APPLICATION REQUIREMENTS:

• Cargo Motors is an Equal Opportunity Employer and preference will be given to Employment Equity candidates.
• Applications should be accompanied by an up-to-date CV indicating achievements, knowledge, skills and qualifications.

All applications must be processed via by no later than 08 September 2025. Please note that if you do not receive any feedback from us within two weeks regarding your application, consider it unsuccessful.

The role of a Controller: Quality Control is to ensure that specific quality standards and specifications throughout the Truck/VANS service process are met, playing a crucial role in maintaining service integrity and customer satisfaction.

Manage staff Key Performance Areas:

• Prioritizing workload
• Keep W I P under control
• Compile reports
• Inform Product Support Department of product failures
• Ensure that technical information is updated
• Ensuring that warranty claims are administered and to ensure warranty parts are in the warranty store.
• Quality Control of vehicles to ensure top quality workmanship and to ensure that all customer complaints/requirements have been attended to.
• Proper cost control
• Additional duties will be given and many change from time to time as required

Providing customers with excellent service:

• Ensuring that work is carried out to Mercedes-Benz Standard and as arranged / agreed with customers
• Constant customer/service advisor feed back
• Handle customer queries
• Give feedback on Tactix complaints

• Matric / N3
• Trade Test qualification(Diesel Technician/Motor Mechanic) will be an added advantage
• Five-year experience on Daimler Trucks & Bus products a must (Mercedes-Benz Trucks or Mercedes-Benz Vans or FUSO)
• Clear Criminal Record
• A Valid Driver's License C1, EC
• Computer literate

• Communication skills
• Technical skills
• Organization skills
• Multitasking skills
• Problem-solving skills
• Customer service skills
• Adaptability
• Emotional intelligence
• Positive attitude
• Confidence
• Professionalism

Parts & Spares Quality Control Receiving Inspector East Rand

We are looking for a Receiving Inspector with heavy machinery parts experience.

The role involves inspecting and verifying parts against drawings / specs, using verniers, micrometers and measuring tools; receiving containers and handling documentation

Working hours: 07h00 17h00 (may vary when required)

Minimum requirements:

• Heavy machinery parts experience and Quality Control background is preferable
• Able to interpret technical drawings
• Attention to detail and strong admin skills
• Flexible in terms of early / late work times when required

Salary offer: Negotiable

We are looking for a Receiving Inspector with heavy machinery parts experience.

The role involves inspecting and verifying parts against drawings / specs, using verniers, micrometers and measuring tools; receiving containers and handling documentation

Working hours: 07h00 - 17h00 (may vary when required)

Minimum Requirements

• Heavy machinery parts experience and Quality Control background is preferable
• Able to interpret technical drawings
• Attention to detail and strong admin skills
• Flexible in terms of early / late work times when required

Salary offer: Negotiable

To manage and direct Quality Assurance section of SAAT in order to minimise risk exposure (reputation, regulatory compliance, property loss, financial, etc.), ensure compliance with all relevant legislation and meet customer expectations.

To develop and manage the implementation of Quality Management System to ensure compliance with SAAT, Customers and aviation regulatory requirements.

• Manage Quality Management System for SAAT, identify non compliances, suggest corrective actions to relevant managers in order to minimise aviation authorities' findings and threat to SAAT for retaining customers and aviation authority approvals.
• Obtain and manage various AMO approvals held by SAAT to ensure a continual functioning of various departments, to support their growth and maintain the capability of the organisation.
• Provide adequate liaison with National and International Regulatory, legislative bodies and Operators to ensure compliance with all regulations and standards.
• Prepare, submit and negotiate exemptions, extensions and concessions with the NAA's to ensure uninterrupted operations.
• Manage the auditing and approval of suppliers and service providers to SAAT to ensure usage of qualified sources and address any quality lapses.
• Formulate procedures and policies to continually ensure adherence to requirements of aircraft and components manufactures, SAAT, customer requirements and aviation regulation.
• Manage planning and conducting of external audits at SAAT (SACAA, EASA, FM etc.).
• Prepare and submit responses to audit reports from Regulatory Authorities and Operators after external audit audits.

To manage and perform accident and incident investigations in order to prevent re-occurrence and ensure compliance with legislation.

• Conduct investigations to determine the root cause of quality lapses and premature failures in the products of SAAT in order to provide meaningful evidence to defend or institute legal or disciplinary actions for/or against SAAT
• Review and analyze trends from incidents and report back to customers as per contractual obligations and to prevent re-occurrence.
• Compile reports for various regulatory bodies, customers and internal stakeholder to report back on findings and possible long and short term corrective action.

To manage the process of obtaining certification examination and licensing process to ensure adherence to aviation regulatory authorities competency assessment requirements.

• Review SAAT employee's applications and schedule examination process in order to determine qualification for assessment and certification.
• Analyse data to ensure accurate certification examination statistics are supplied in order to assist management to mentor candidates where required.

To develop and manage Internal issue of staff licenses to ensure compliance to regulatory requirements and air worthiness of aircraft and components.

• Develop and manage the licensing system and processes in line with regulatory requirements.
• Review, process and authorize licensing applications.
• Monitor staff experience and competency assessments in line with regulatory requirements

To establish and manage the sections' budget in line with SAAT QA division's objectives.

• Contribute to establishing the annual budget, plan and review the capital budget in line with SAAT Quality Assurance divisional strategy/objectives and produce reports to track expenditure as required.
• Manage invoicing processes in order to ensure timeous and efficient generation of correct invoices and minimise cash flow issues.

To manage the section's human resources in line with SAAT's HR policies and procedures.

• Recruit staff per the section's staffing demand
• Maintain regular staff meetings and feedback sessions

Qualification

• Relevant degree or equivalent plus 7 years experience in Engineering, preferably with quality and risk management.
• Relevant diploma or N6, plus 9 years experience in Engineering, preferably with quality and risk management focus.
• 12 years experience with aircraft trade with 8 years experience and 4 years experience in quality assurance/auditor/controller or production leader.
• Qualified in one of the aircraft aviation trades.
• SACAA/EASA/FAA Regulatory training.
• Quality Management System training .
• Accident and Incident Investigation training.
• IOSA Auditor Training.

Knowledge

• Aviation Industry
• Aviation rules and regulations
• Report & Procedure Writing
• Analytical and assessment skills

Demonstrate the SAA values: Customer Focus; Accountability; Integrity; Safety; Excellence In Performance; Valuing Our People

• Analytical Thinking
• Organisational Awareness

Minimum Requirements
Minimum Qualifications

• Bachelor's degree in Education/ Quality Assurance, Project Management or equivalent
• QMS Qualification will be an added advantage

Minimum Experience

• Minimum of five (5) years' experience in Quality Assurance/Quality Management System/Integrated Quality Management System.