85 Quality Control jobs in Gauteng

Quality Lead

Your responsibilities

• Responsibilities and duties include but are not limited to:
• Monitoring and management of quality control inspections (receiving, in-process, and final) of all products.
• Assist with the identification and development of required procedures and processes related to the Quality Management System.
• Monitoring of quality control processes in the workshop to ensure adherence.
• Formulation of quality control/assurance documents such as QCPs, Dimensional Report templates, SOPs, etc.
• Continuously monitor manufacturing progress in the warehouse and ensure proactive quality control throughout the process.
• Provide prompt and effective quality assurance assistance/services to all internal departments.
• Maintain and coordinate the calibration of all measurement/inspection equipment used for quality control.
• Prepare/formulate inspection reports.
• NCR reporting and communication thereof.
• Record, investigate, and drive action on all rectification actions on internal NCR-reported issues as per the Quality system requirements.
• Condition assessment of failed and/or refurbishment job subassemblies/equipment. Formulation of assessment reports including recommendations.
• Review externally supplied manufacturing documents for verification against required manufacturing specifications.
• Comprehensive quality release of complete assemblies, subassemblies, and other equipment.
• Data book formulation, compilation, and record keeping.
• Management of product/equipment quality documentation & traceability.
• Investigate and address customer complaints regarding quality. Prepare, distribute, and communicate the results of assessments or analyses to all involved parties.
• Make appropriate conclusions supported by evidence and factual report analysis.
• Management, monitoring, and reporting of quality-related KPIs.
• Managing the QC team.

Leading the department

• Manage all staff-related issues as required.
• Coach, mentor, and develop inspection staff.
• Supervise inspectors and provide guidance and feedback.
• Oversee product recalls, warranty claims, and customer quality complaints.
• Manage the monitoring, measurement, and review of internal processes affecting product quality.
• Report to management on the performance of the QMS (e.g., results of quality audits, corrective actions), including the need for improvements.
• Stay informed about all quality requirements related to the business.

Reporting

• NCRs
• Continuous improvement initiatives
• Lessons learned on completed jobs

What you bring

• Relevant engineering qualification, minimum Trade tested.
• Relevant technical qualification, especially in welding and fabrication procedures (e.g., SAIW qualification).
• A quality-related qualification or extensive experience (ISO 9001, etc.).
• 5 years experience in a medium to heavy engineering environment.
• 5 years of quality lead/supervisory experience.
• Demonstrated manufacturing, production, and leadership skills.
• Knowledge of FLS mining equipment.
• Self-motivated and driven for success.
• Knowledge of quality systems and standards.
• Sound knowledge and understanding of all measuring equipment.
• Machining techniques and processes/equipment.
• Knowledge of Microsoft D365 (beneficial).

FLSmidth is the leading supplier of engineering equipment and service solutions to customers in the mining and cement industries. For more information, please visit.

Key Skills

Computer, IT Audit, CAD/CAM, ABAP, Exterior Designing, HR Operations

Employment Type: Full-Time

Experience: (Specify years)

Vacancy: 1

Position Overview:
We are seeking a highly motivated and detail-oriented individual to join our team as a Quality Control Officer. To ensure that all products and processes in the power cord manufacturing environment meet the highest quality standards and are compliant with the company’s quality management system (QMS). The QA Inspector is responsible for conducting in-process inspections, random testing, system audits, and ensuring corrective and preventive actions (CAPA) are implemented and documented.

Core Activities:

1. Quality Inspections and Testing:

• Conduct regular inspections of supplier raw materials and at various stages of the manufacturing process to ensure compliance with quality standards and specifications. Perform testing and measurements using calibrated equipment to verify product functionality, safety, and reliability. Record and document inspection results, test data, and any deviations from quality standards.

1. Quality Control Procedures:
   • Develop, implement, and maintain quality control procedures and work instructions for manufacturing processes. Establish sampling plans, acceptance criteria, and inspection methods to ensure consistent product quality. Monitor adherence to quality control procedures and provide guidance to production teams as needed.
2. Non-Conformance Management:
   • Identify and document non-conformities, defects, or deviations from quality standards during inspections and testing. Investigate root causes of non-conformities and implement corrective and preventive actions to address quality issues. Track and monitor the effectiveness of corrective actions to prevent recurrence of non-conformities.
3. "Continuous Improvement Initiatives:
   • Identify opportunities for process improvements and efficiency gains in quality control procedures and manufacturing processes. Participate in continuous improvement projects and quality improvement teams to enhance product quality and reduce defects. Use quality tools and methodologies such as Six Sigma, Lean Manufacturing, and Root Cause Analysis to drive process improvements."
4. Regulatory Compliance:
   • Ensure compliance with regulatory requirements and standards related to product quality, safety, and environmental protection. Stay updated on industry regulations, standards, and quality management system requirements to ensure adherence to all applicable requirements. Collaborate with regulatory affairs and compliance teams to address any quality-related regulatory issues or requirements.
5. Documentation and Reporting:
   • Maintain accurate records and documentation of quality control activities, inspection results, test data, and non-conformities. Prepare quality reports, trend analyses, and performance metrics to track quality performance and communicate findings to management and stakeholders. Ensure documentation complies with regulatory requirements and internal quality management system (QMS) standards.

Core Decisions:

1. Acceptance of Products:
   • Decide whether to accept or reject product batches based on quality inspection results and adherence to specifications.
2. Implementation of Corrective Actions:
   • Determine appropriate corrective actions to address non-conformities, defects, or deviations from quality standards identified during inspections and testing.
3. Approval of Supplier Quality:
   • Decide whether to approve or reject suppliers based on their ability to meet quality requirements and performance standards.
4. Changes to Quality Control Procedures:
   • Decide whether to update or revise quality control procedures, work instructions, or sampling plans to improve effectiveness and efficiency.
5. Investigation of Quality Incidents:
   • Determine the root causes of quality incidents, complaints, or customer returns and decide on appropriate corrective and preventive actions.
6. Resource Allocation for Quality Improvement:
   • Decide on resource allocation for quality improvement initiatives, such as training, equipment upgrades, or process improvements. Decide on actions to ensure compliance with regulatory requirements, standards, and quality management system (QMS) requirements.

Core Capabilities:

1. Technical Competence:
   • Understanding of manufacturing processes, materials, and specifications. Proficiency in using quality control tools, equipment, and testing methods relevant to electrical components.
   • Knowledge of industry standards and regulations related to electrical product safety and quality.
2. Analytical Skills:
   • Ability to analyze data, test results, and quality metrics to identify trends, patterns, and areas for improvement.
3. Problem-Solving Abilities:
   • Aptitude for identifying root causes of quality issues and implementing effective corrective and preventive actions.
   • Capacity to troubleshoot quality-related problems and make timely decisions to address them.
4. Attention to Detail:
   • Meticulous attention to detail is crucial for conducting thorough inspections, testing, and documentation of quality control activities.
   • Ability to identify even minor deviations from quality standards and specifications.
5. Communication Skills:
   • Effective communication skills, both verbal and written, to convey quality expectations, report findings, and collaborate with cross-functional teams.
6. Quality Management System (QMS) Knowledge:
   • Familiarity with quality management principles and practices, including ISO 9001 standards and quality assurance methodologies.
   • Understanding of QMS requirements, documentation standards, and procedures for maintaining compliance.
   • Ability to ensure compliance with regulatory requirements and maintain up-to-date knowledge of industry regulations.
   • Commitment to continuous improvement and quality excellence through the implementation of quality improvement initiatives and best practices.
7. Teamwork and Collaboration:
   • Ability to collaborate effectively with production teams, engineers, quality assurance personnel, suppliers, and other stakeholders to achieve quality objectives.

Requirements:

• Quality Management or Quality Control qualification (National Diploma or higher preferred)
• Minimum 5 years of experience in the cable or electrical component manufacturing industry
• In-depth knowledge of cable manufacturing processes and quality requirements
• Proficient in the use of measurement tools (multi-meters, callipers, hi-pot testers, micrometres, etc.)
• Familiar with ISO standards (e.g., ISO 9001), Six Sigma, and Kaizen methodology
• Strong analytical and root-cause analysis skills
• Competent in drafting technical reports and documentation
• High attention to detail
• Ability to work independently and make objective decisions.
• Strong written and verbal communication skills
• Excellent organizational and time management abilities
• Uncompromising integrity and commitment to quality
• Initiative-taking, assertive, and able to stand firm under pressure.

Summary:

Perform quality control checks on products before processing to ensure compliance with company standards and supplier requirements. Conduct inspections on all item being processed and address defects, deviations, or non-conformities.

Key Responsibilities:

1. Inspect products, materials before processing stage.
2. Ensuring daily demand targets of parcels being processed are met.
3. Identify and isolate non-conforming products or materials. Notify production staff and manager of quality issues.
4. Collaborate with production teams to resolve quality problems.
5. Maintain a clean and organized work environment.

Requirements:

1. High school matric.
2. 1-2 years of warehousing operations experience and knowledge of quality control principles.
3. Analytical and problem-solving skills. Attention to detail and accuracy is crucial.
4. Effective communication and teamwork skills. Ability to work in a fast-paced environment.
5. Basic computer skills (e.g., data entry, reporting).

Join to apply for the Quality Control Supervisor role at ExecutivePlacements.com - The JOB Portal

3 days ago Be among the first 25 applicants

SUMMARY: Our client based in Johannesburg specializes in packaging for the food and beverage, pharmaceutical, household, and personal care markets.

Recruiter: Stratogo

Job Ref: HQ000964/pn

Date posted: Saturday, November 23, 2024

Location: Johannesburg, South Africa

Salary: 29165.00 Monthly

Position Info:

• Purpose of the Role: To ensure products manufactured conform to quality, safety, and reliability standards
• Role: Quality Control Supervisor
• Industry: Manufacturing - Packaging
• Qualifications: Matric, NQF 4 - Supervisory Management Qualification, Certificate in Quality Control
• Skills: People management skills, Attention to detail, Problem solving skills
• Competencies: Technical knowledge of process, inclusive of equipment and raw materials; Relevant quality system and certification; Diversity Management; Conflict Management

Quality Control Planning:

• Develop and implement quality control procedures and protocols to ensure compliance with company standards and regulatory requirements.
• Conduct regular audits
• Develop and maintain quality control records, including documentation of test results, inspection reports, and corrective actions taken.

Personnel Management: Responsible to lead, motivate and train subordinates

Customer Service: Responsible for customer inquiries regarding product quality and providing resolutions to customer complaints.

Reporting and Administration

Health and Safety

Food Safety Systems Certification - FSSC

Self Development and Growth

• Mid-Senior level

• Full-time

• Quality Assurance

• Manufacturing - Packaging

To ensure that all materials and processes adhere strictly to customer specifications and internal quality standards, and to oversee the implementation and compliance of quality systems within the production division.

• PRINCIPAL ACCOUNTABILITIES

Accountabilities

Key Performance Indicators (KPIs)

Support in determining, negotiating, and agreeing upon in-house quality procedures, standards, and specifications

Clearly documented quality procedures aligned with ISO and customer expectations

Ensure adherence to quality, health, and safety standards across the plant

Zero non-conformities and audit failures; reduced incident reports

Monitor and ensure that manufacturing processes comply with defined quality standards

Regular inspections, compliance audits, and corrective actions documented and implemented

Conduct and document quality testing (pre-production, in-process, and final product)

100% completion of quality checklists and sampling reports

Follow established procedures, ISO guidelines, and maintain proper documentation

ISO compliance and audit-readiness at all times

Act as a catalyst for continuous improvement in quality and operational efficiency

Number of improvement initiatives implemented per quarter; measurable performance improvements

Lead, manage and motivate quality control staff to meet departmental goals

Achievement of departmental KPIs; performance reviews and development plans completed on time

Monitor and document critical control points (CCPs) regularly

Accurate and timely CCP logs with corrective actions recorded

Ensure customer requirements and service standards are understood and implemented

Positive customer feedback; low rate of quality-related returns or complaints

• INTERACTIONS

Internal :

• Production Department
• Purchase / Procurement
• Planning and Production Control (PPC)
• Maintenance and R&D (as applicable)

External :

• Customers and end-users (for quality audits, complaints, and resolution)
• Raw material vendors and external testing laboratories
• Certification bodies (for ISO or regulatory audits)
• SKILLS AND KNOWLEDGE

Educational Qualifications :

• Post Graduate Diploma in Plastics Technology / CIPET or
• Diploma in Plastics / Mechanical Engineering or related field

Relevant Industry Experience :

• 5–7 years of experience in a Packaging Manufacturing Industry with hands-on exposure to Quality Control and Assurance

Technical Skills :

• In-depth knowledge of packaging processes (lamination, extrusion, printing, slitting, sealing)
• Experience with lab instruments and testing procedures (tensile strength, bond strength, GSM, COF, WVTR, etc.)
• Proficiency in ISO 9001 / ISO 22000 / HACCP and other quality management systems
• Skilled in preparing audit documentation, process documentation, and quality SOPs

Behavioral Skills :

• Strong analytical and problem-solving ability
• Detail-oriented with a commitment to accuracy and process compliance
• Effective communicator and team leader
• Ability to manage cross-functional teams under pressure

Quality Control Assistant • Centurion, South Africa

Job Title Quality Control Inspector Reporting To Simon LetsokoSeniority Level Mid-Career (2 - 4 yrs exp)Type 3 to 4 Months (possible going perm)

• Matric with an overall pass mark of minimum 50% and the following subjects as a minimum:
• English
• Mathematics (Normal, NOT Literacy)
• Science
• Tertiary Education (Advantageous):
• Certificate in Mechanical Engineering or Similar Field of Study; OR,
• Certificate in any Quality Assurance / Quality Control Field of Study
• Proven Knowledge in:
• Use of various measurement instruments.
• Use of Shadow Graphs, Load Indicators and Scales.
• Use of Basic functions in Microsoft Word & Excel.
• Interpretation of Product Drawings including customer specific requirements.
• Basic mathematical skills

• With Formal Education: Minimum 6 Months experience in a Manufacturing Environment;
• Without Formal Education: Minimum 2 Years experience in a Manufacturing Environment of which a minimum of 1 year was in a QC inspector role.
• Skills Required:
• Good Communication Skills Verbal & Written
• Good Reading Skills
• Excellent Visual Attention to Detail
• Good Analytical Skills

• Verify accuracy and condition of measuring instruments.
• Validate the First Off products as produced by Setters using measuring instruments and record results from these inspections as per relevant instructions.
• Assist in Metrology related aspects pertaining to R&D.
• Ensure that production personnel have the relevant QC resources to perform all their verification duties accurately.
• Set up of Gauges to be used by operators during production, including the verification of dimensions and condition as per relevant instructions.
• Conduct training on verification activities required by production personnel.
• Audit the effective operation of production activities.
• Continuously conduct patrol inspections to verify the conformance of processes against required standards as per relevant instructions.
• Visually inspect the fit and form appearance of products against requirements as per relevant instructions.
• Conduct line clearances of scrap parts produced by setters and operators as well as recording of scrap quantities as per relevant instructions.
• Stop relevant production machines and raise Non-Conformance Reports where processes are deviating from the required standards.
• Isolate or quarantine and control non-conforming parts as per relevant instructions.
• Update and file relevant QC records as required.
• Maintain proper housekeeping standards as per relevant requirements and instructions.
• Work in a manner that does not present risk to the health & safety of any person on site.
• Conducting destructive Tests using pressurized equipment on components, sub-assemblies and assemblies on a frequent basis as required by the process.
• Assessing the conformity of products tested based on Failure Load and Failure Mode.
• Entering of results as data into Data Entry Software.
• Drawing conclusions and making recommendations or escalations based on data analysis.
• Compiling and communicating Reports and COCs from results.
• Managing Testing Equipment, Method, and Control as well as the Setup configuration.
• General administration, reporting and updating relevant registers as may be required.
• Ad-Hoc destructive testing and reporting as may be required from time to time.
• Carry out any reasonable and legal instructions as operationally required by this role.

• Portray a safety conscious attitude.
• Maintain and promote the good reputation of the Company.
• Ability to work alone and as part of team
• Ability to work under extreme pressure
• High level of Attention to Detail
• Willingness to work overtime from time to time as required at short notice
• Sober Habits
• Some tasks involve a high level of Walking
• Role requires the lifting and manoeuvring of heavy parts and equipment
• Role requires a high level of standing and physical work
• Role requires a high level of reports administration

Reporting to the Design and Technical Manager, the Quality Inspector will play a pivotal role in ensuring the quality and integrity of products during the manufacturing process. Responsible for inspecting, testing and evaluating materials, components, and finished goods to ensure they meet established quality standards and specifications. 

• Responsible for Syrinx system compliance to quality, all quality issues around WM flow, quotes, drawings, works orders(WO), bills of materials (BOM), stores / issue, factory / manufacture / rental unit prep / conversion, transport and siting
• Quality at branches - rental yards, minimum rental stock rentals ready, inventory checks against rental stock reports 
• Inspection and testing
• Monitor production processes to identify potential quality issues or deviations from established procedures 
• Identify and document non-conforming materials, components or products, and communicate findings to appropriate personnel for corrective action
• Root cause analysis
• Documentation and reporting
• Training and compliance 

• Grade 12
• SAGE, Pastel,SAP or Accpac experience advantageous 
• HIRA and root cause analysis, ISO experience and implementation certificate as well as internal auditor training
• 5 Years experience in repairs and maintenance preferrably of modular building and experience in quality control
• Good interpersonal and communication skills
• Proven experience as quality inspector or in a similar role, preferrably in a manufacturing environment
• Proficiency in reading engineering drawings, specifications and technical documents
• Ability to use precision measuring instruments and testing equipment
• Excellent attention to detail and ability to identify deviations or abnormalities in product quality 
• Strong problem-solving skills and ability to conduct root cause analysis

R38 000CTC 

Join to apply for the Production & Quality Control Supervisor role at ExecutivePlacements.com - The JOB Portal

Join to apply for the Production & Quality Control Supervisor role at ExecutivePlacements.com - The JOB Portal

SUMMARY:

Our client is looking for a Production & Quality Control Supervisor to join their dynamic team in Kempton park in the Pharmaceutical industry.

Recruiter:

Flink Recruitment

Job Ref:

PTA000575/CDW

Date posted:

Wednesday, July 9, 2025

Location:

Kempton Park, South Africa

SUMMARY:

Our client is looking for a Production & Quality Control Supervisor to join their dynamic team in Kempton park in the Pharmaceutical industry.

POSITION INFO:

Roles And Responsibilities

Role Overview

We seek an experienced Production & Quality Control Supervisor to oversee operations at our soap bar manufacturing facility. This role ensures that all products meet internal and external quality standards while optimizing production processes.

Key Responsibilities

Production & Quality Assurance: Lead production staff to meet quality and efficiency targets. Implement and monitor quality assurance procedures, ensuring regulatory compliance.

Process Improvement: Identify and implement enhancements to reduce defects, improve efficiency, and maintain high standards. Investigate and address customer complaints.

Team Leadership & Training: Supervise, train, and mentor staff. Conduct root cause analyses for defects and implement corrective measures.

Qualifications & Experience

Education: Matric with experience in Quality Control & Production Supervision. Certification in Quality Management (e.g., ISO 9001) is advantageous.

Experience: 3+ years in quality control/assurance within cosmetics, toiletries, or pharmaceutical manufacturing. Proven leadership in supervising production teams.

Skills: Strong problem-solving, analytical, and organizational abilities. Excellent communication and ability to perform under pressure.

Personal Attributes

Strong leadership and interpersonal skills

High integrity and commitment to quality

Proactive, solution-oriented mindset

Benefits

Competitive salary based on experience

Dynamic, collaborative work environment

Growth opportunities in a rapidly expanding company

If you are a motivated leader passionate about quality and production efficiency, we encourage you to apply!

Job Type: Full-time

Pay: R15 000,00 - R18 000,00 per month

Education:

High School (matric) (Required)

Experience:

Quality Control cosmetics/toiletries/pharmaceutical: 3 years (Required)

Quality Control & Production Supervision: 3 years (Required)

Certification in Quality Management (e.g. ISO 9001): 3 years (Preferred)

Supervising production teams: 3 years (Required)

Employment Details

Employment Type: Permanent Employment

Industry: Pharmaceutical

Work space preference: Work Onsite

Ideal work province: Gauteng

Ideal work city: Kempton Park

Salary bracket: R 15 000 - 18 000

Drivers License: CODE B (Car)

Own car needed: Yes

• Seniority level Mid-Senior level

• Employment type Full-time

• Job function Quality Assurance
• Industries Advertising Services

Referrals increase your chances of interviewing at ExecutivePlacements.com - The JOB Portal by 2x

Johannesburg, Gauteng, South Africa 1 month ago

Johannesburg, Gauteng, South Africa 1 week ago

Johannesburg, Gauteng, South Africa 1 week ago

City of Johannesburg, Gauteng, South Africa 6 days ago

Kempton Park, Gauteng, South Africa 4 days ago

Johannesburg, Gauteng, South Africa 1 week ago

East Rand, Gauteng, South Africa 1 week ago

Johannesburg, Gauteng, South Africa 1 week ago

Randburg, Gauteng, South Africa 7 months ago

Johannesburg, Gauteng, South Africa 1 week ago

Johannesburg, Gauteng, South Africa 1 week ago

Johannesburg, Gauteng, South Africa 1 week ago

Johannesburg, Gauteng, South Africa 1 week ago

Centurion, Gauteng, South Africa 6 days ago

Johannesburg, Gauteng, South Africa 1 week ago

Johannesburg, Gauteng, South Africa 1 week ago

Springs, Gauteng, South Africa 6 days ago

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.