72 Jobs in Mabopane
Process Engineer
Posted 2 days ago
Job Viewed
Job Description
- To ensure the geometrical process holistically is monitored and controlled on all hang on assembly & press parts in conjunction with cold and hot joining technologies conforming to all customer specific requirements.
- Monitor and control the inputs and outputs from the geometrical processes, parameters and adjust according to meet customer specifications using all applicable analysis tools.
- Grade 12 / NQF 4,
- Tertiary education: National Diploma in Mechanical Engineering / NQF 6 Artisan,
- Kuka programming 1, Siemens PLC TIA Pro,
- Minimum 10 years in automotive / vehicle manufacturing environment, Minimum 3 years extensive experience in KUKA Robotics, hemming application & Siemens PLC
- 5 Why, Ishikawa & 8D tools applied methodology.
Knowledge and Skills required:
- Geometry analysis of single press and assembled parts (FMK & GOM inspect) correlating back to technology impacts
- Physical assembly part fixture adjustments to conform to customer requirements
- Applying customer car line co-ordinates methodology back to fixture to correct geometry
- Shim pack analysis and compliance
- Intec sealer effects on geometry outcome
- Hemming systems effects on geometry outcome
- Kuka robotics monitoring and validations of programs & adjustments
- Micro sectioning analysis of sealer, hemming and the effect it has on geometry
- Communication skills
- Systemic problem solving and route cause analysis
- FMEA & Control plan applied methodology
- Advance problem solving and applied tools experience
Manufacturing Process Engineer
Posted 2 days ago
Job Viewed
Job Description
- To ensure the cold joining process holistically is monitored and controlled on all hang on assembly parts in conjunction with geometry and hot joining technologies conforming to all customer specific requirements.
- Monitor and control the inputs and outputs from the cold joining processes, parameters and adjust according to meet customer specifications using all applicable analysis tools.
Knowledge and Skills required.
- Intec sealer incorporation, monitoring & adjustments
- VisionTools systems - incorporation, monitoring & adjustments
- TOX systems incorporation, monitoring & adjustments
- Engrotec hemming systems incorporation, monitoring & adjustments
- Kuka robotics monitoring and validations of programs & adjustments
- Geometry analysis of single and assembled parts (FMK & GOM inspect) correlating back to technology impacts
- Micro sectioning analysis of sealer and hemming
- Communication skills
- Systemic problem solving and route cause analysis
- Time management
- Interpersonal skills
- Advance problem solving and tools
- Technical & practical procedural compiling & training
- Safety, quality and customer requirements driven
Job Requirements:
- Grade 12 / NQF 4
- Tertiary education: National Diploma in Mechanical Engineering / NQF 6 Artisan Millwright
- Minimum 10 years in automotive / vehicle manufacturing environment
- Minimum 5 years extensive experience in: KUKA Robotics KRC4 Kremlin sealer applications, Vision Tools, Siemens PLC
- PAKII sealer analysis and customer requirements,
- Physical hemming application methodology in correlation to KUKA robotics,
- 5 Why, Ishikawa & 8D tools applied methodology
Production Manager
Posted 2 days ago
Job Viewed
Job Description
- Manage all functions and ensure that production targets are met according to quality standards
- Conduct meeting with production teams in order to prioritize and plan daily and or shift activities
- Apply just in time principles as and when required
- Ensure that all production resources are available timeously
- Monitor/ Control quality and all line activities throughout duration of the shift
- Ensure effective shop floor planning according to load chart as well as advance planning.
- Ensure that the set OEE is achieved for each of the operations stamping and assembly
- Liaise with all supporting department regarding preventative and breakdown on machine and tools
- Ensure proper usage and care of all equipment, tooling and material
- Ensure that any production loss is followed up immediately
- Ensure accurate and timeous completion of all production and quality related documentation
- Monitor and reconcile expenditure against budget on a monthly basis Investigate and resolve any discrepancies
Job Requirements:
- Degree Production, Mechanical or Industrial Engineering
- Minimum 3-5 years quality background within the automotive environment.
- Minimum 8 years Assembly experience,
- Minimum 5 years supervisory experience in Automotive Quality Environment
- Minimum 2 years experience in tool and jig manufacturing
Knowledge and Skills required:
- Management of Press Shop & Assembly
- Administration
- 3Management of staff
- Housekeeping
- Performance Targets
- Productivity improvements
- Product improvements
- Versatility / job enhancement
Plant Personnel Officer
Posted 2 days ago
Job Viewed
Job Description
- Administer employee attendance and hours worked (Time Management)
- Check overtime and call out claims
- Administer employee leave
- Time Management for weekly paid, monthly paid as well as Labour Broker employees. Weekly payrolls to be completed by Tuesdays, monthly payrolls by the 15th of every month.
- Export hours to Payroll
- Payslips
- Attendance Bonus calculation
- Assist with headcount verification
- Provide support to the IR function
- Salary Staff
- Dismissal, Resignation and Retirement administration
- Reporting
- Keep personnel files up to date
- Funeral transport arrangements
- Tea and coffee ration
- Employee assistance
- Savings administration
- Gr12/NQF4
- National Diploma in Human Resources/Personnel Administration NQF6
- 2-4 years of experience
- MS Office Excel
- Clocking systems Elko
Knowledge and Skills required:
- Basic Conditions of Employment Act
- HR Company procedures and works instructions
Diesel Electric Fitter
Posted 2 days ago
Job Viewed
Job Description
- Perform inspections, preventive maintenance, and repairs on locomotives according to company guidelines and checklists.
- Diagnose mechanical issues by observing equipment in operation, listening for irregularities, and using precision measuring tools.
- Dismantle devices using hoists, cranes, hand and power tools to access and replace defective parts.
- Inspect, measure, and adjust components to meet dimensional requirements.
- Operate grinders, metalworking tools, welding, and cutting equipment to fabricate or repair parts.
- Record locomotive hour meter readings and perform fluid sampling (lube oil, cooling water, etc.).
- Clean, service, and replace filters, strainers, spark arrestor traps, and lubrication systems.
- Conduct brake and safety equipment tests.
- Inspect wheels, trucks, fuel tanks, brakes, handrails, steps, hoses, clamps, fire extinguishers, and other critical systems.
- Drain and service fuel tanks, reservoirs, and retention tanks as required.
- Time injectors and valves, set racks, check turbo backlash, and perform bearing checks.
- Carry out electrical maintenance and modifications where required.
- Operate overhead cranes, forklifts, and heavy lifting equipment safely.
- Complete documentation, inspection reports, and sign-offs accurately.
- High school diploma or GED equivalent.
- 36 months of mechanical experience (locomotive/rail experience preferred) OR equivalent combination of education and experience.
- Proficiency with hand tools (screwdrivers, torque wrenches, callipers, micrometres, pry bars).
- Skilled in using power tools (cut-off saws, drills, grinders, impact wrenches).
- Knowledge of hydraulic tools and equipment (wrenches, barring over tools).
- Ability to operate welding and cutting tools.
- Experience with heavy equipment operation (overhead cranes, truck cranes, forklifts).
- Strong mechanical and electrical maintenance skills.
- Ability to read blueprints, schematics, and maintenance manuals.
- Competence in shop mathematics and problem-solving.
- Must be able to bend, stoop, kneel, twist, climb, and balance regularly.
- Ability to lift and exert force:
- Up to 11 kg regularly
- Up to 25 kg frequently
- Up to 65 kg occasionally
- Must be able to work outdoors in varying weather conditions.
- Exposure to high noise levels, moving machinery, diesel fumes, oil, grease, and occasionally chemicals.
- Work may involve confined spaces, elevated platforms, and uneven ground.
Logistics Controller
Posted 2 days ago
Job Viewed
Job Description
Financial & Compliance
- Process, reconcile, and maintain customs documentation with forex payments for SARS audits.
- Liaise with freight agents on customs tariffs, duties, and resolve customs-related queries.
- Compile, manage, and reconcile freight company accounts for imports and exports.
- Create Freight Purchase Orders, Sales Orders, Commercial Invoices, and Packing Lists.
- Manage shipping notices from foreign suppliers and arrange suitable modes of transport.
- Track deliveries to customers and validate once stock is received.
- Build strong relationships with foreign and local logistics service providers.
- Provide accurate ETA updates, pricing, and availability to internal stakeholders.
- Process Commercial Invoices and Sales Orders in the Pastel system.
- Provide timeous feedback and support to internal and external customers.
- Coordinate cargo movements from overseas suppliers to local warehouses.
- Manage temporary/permanent imports, exports, and re-imports of parts and rolling stock.
- Arrange and expedite customs clearances and ensure compliance with SARS requirements.
- Maintain accurate filing and safekeeping of customs documentation.
- Negotiate freight rates and manage any deviations.
- Compile and manage weekly freight cost reports.
- Obtain quotes for various modes of transport and arrange shipments.
- Monitor and manage transporter reports, addressing issues that may cause financial implications.
- Track customs clearance processes to minimise demurrage and standing charges.
- Communicate any deviations to customers and stakeholders promptly.
- Diploma or equivalent qualification in Logistics and/or Supply Chain Management .
- Minimum 5 years experience in Logistics, Freight Forwarding, Customs, Procurement, or Supply Chain.
- Strong knowledge and application of Incoterms .
- Proficient in Microsoft Excel and Word .
- Experience with Sage (Pastel) .
- Strong interpersonal, communication, and negotiation skills.
- Analytical and problem-solving ability with excellent attention to detail.
- Deadline-driven with strong planning and organisational skills.
- Ability to take accountability and drive the full logistics process from start to finish.
- Comfortable working under pressure and independently.
- Willingness to work overtime when required.
Customer Service
Posted 4 days ago
Job Viewed
Job Description
Be The First To Know
About the latest All Jobs in Mabopane !
Inbound Consultant
Posted 4 days ago
Job Viewed
Job Description
Diesel Engine Assembler
Posted 4 days ago
Job Viewed
Job Description
Must work independent
Assembling, disassembling, and rebuilding diesel engines according to manufacturer specifications
Trade test certificate in diesel mechanics are required
Cannery Worker
Posted 4 days ago
Job Viewed
Job Description
Cannery Worker Duties
Operate canning machinery
Pack products in cans
Fill cans with product
Seal cans shut
Label and package cans
Inspect cans for defects
Maintain and clean equipment
Monitor quality of products
Personal Traits
Strong work ethic
Attention to detail
Ability to work in a fast-paced environment
Cannery Worker Skills
Ability to follow instructions
Ability to work well in a team setting
Ability to operate machinery safely
Ability to work in a fast-paced environment
Ability to stand for extended periods of time