660 Quality Control jobs in South Africa

Our client is seeking a qualified and experienced Quality Control Supervisor to join their dynamic team.

Job Summary :

To ensure manufactured products conform to quality, safety, and reliability standards.

Job Requirements : Education :

• Matric
• Tertiary Education (including Diplomas, Certificates, and Degrees)
• NQF 4 Supervisory Management Qualification
• Certificate in Quality Control

Experience :

Competencies : Knowledge :

Skills :

Other Special Requirements :

Decision Making :

Responsibilities :

Quality Control Planning

Quality Control Inspection

Personnel Management

Customer Service :

Reporting and Administration :

Health and Safety :

Food Safety System Certification (FSSC) :

Apply the site’s food safety principles and standards.

Self-Development and Growth

General

Salary : R350 000 CTC

How to apply :

To ensure that all materials and processes adhere strictly to customer specifications and internal quality standards, and to oversee the implementation and compliance of quality systems within the production division.

• PRINCIPAL ACCOUNTABILITIES

Accountabilities

Key Performance Indicators (KPIs)

Support in determining, negotiating, and agreeing upon in-house quality procedures, standards, and specifications

Clearly documented quality procedures aligned with ISO and customer expectations

Ensure adherence to quality, health, and safety standards across the plant

Zero non-conformities and audit failures; reduced incident reports

Monitor and ensure that manufacturing processes comply with defined quality standards

Regular inspections, compliance audits, and corrective actions documented and implemented

Conduct and document quality testing (pre-production, in-process, and final product)

100% completion of quality checklists and sampling reports

Follow established procedures, ISO guidelines, and maintain proper documentation

ISO compliance and audit-readiness at all times

Act as a catalyst for continuous improvement in quality and operational efficiency

Number of improvement initiatives implemented per quarter; measurable performance improvements

Lead, manage and motivate quality control staff to meet departmental goals

Achievement of departmental KPIs; performance reviews and development plans completed on time

Monitor and document critical control points (CCPs) regularly

Accurate and timely CCP logs with corrective actions recorded

Ensure customer requirements and service standards are understood and implemented

Positive customer feedback; low rate of quality-related returns or complaints

• INTERACTIONS

Internal :

• Production Department
• Purchase / Procurement
• Planning and Production Control (PPC)
• Maintenance and R&D (as applicable)

External :

• Customers and end-users (for quality audits, complaints, and resolution)
• Raw material vendors and external testing laboratories
• Certification bodies (for ISO or regulatory audits)
• SKILLS AND KNOWLEDGE

Educational Qualifications :

• Post Graduate Diploma in Plastics Technology / CIPET or
• Diploma in Plastics / Mechanical Engineering or related field

Relevant Industry Experience :

• 5–7 years of experience in a Packaging Manufacturing Industry with hands-on exposure to Quality Control and Assurance

Technical Skills :

• In-depth knowledge of packaging processes (lamination, extrusion, printing, slitting, sealing)
• Experience with lab instruments and testing procedures (tensile strength, bond strength, GSM, COF, WVTR, etc.)
• Proficiency in ISO 9001 / ISO 22000 / HACCP and other quality management systems
• Skilled in preparing audit documentation, process documentation, and quality SOPs

Behavioral Skills :

• Strong analytical and problem-solving ability
• Detail-oriented with a commitment to accuracy and process compliance
• Effective communicator and team leader
• Ability to manage cross-functional teams under pressure

Quality Control Assistant • Centurion, South Africa

Overview

We are seeking a detail-oriented and proactive Quality Control Inspector to join our team. The successful candidate will be responsible for conducting quality control tests, ensuring that raw materials, in-process components, and finished products meet quality standards and customer specifications. This role plays a critical part in maintaining product integrity, safety, and compliance across the production process.

• National Senior Certificate
• 2 - 3 years experience in Quality Contol within a Manufacturing environment
• Knowledge of Quality standards and systems
• Strong attention to detil
• Analytical Skills
• Problem Solving Skills
• Organising Skills
• Decision Making Skills
• Presentation Skills
• Communication Skills
• Troubleshooting
• Creativity
• Use of tools/instruments
• Hande-eye coordination

• Testing of raw materials (sand, paint, polymer, and steel)
• Verification of Certificates of Analysis of raw materials
• Verification of paint components
• Accessory Forming Quality Control Inspections
• Tile forming Quality Control Inspections
• Metal pre-treatment testing
• Monitoring and testing of In-process and Finished Products conformance to specifications and customer requirements
• Identification and reporting of non-conforming products and raw materials as per works instructions.
• Defects identification, reporting to relevant parties and recording as per works instructions.
• Chemical Stock Management
• Ensure calibration and verification of measuring equipment. Maintain the Calibration Register
• Raising NCR’s, Deviations and Concessions
• Ensure SHE (Safety, Health, and Environment) and housekeeping compliance.
• Reports any SHEQ incident / accidents immediately as per the SHE system.
• Uses / ensures the PPE required for the specific tasks or working conditions are used by subordinates.
• Performs tasks assigned in the SHEQ system

• Comply with work rules, standards, and methods. Take care to minimise waste. Identify and provide feedback on cost saving initiatives within area of control

• Provide specialised technical / professional support to internal and external stakeholders to ensure achievement of functional and organisational objectives.
• Build, support and maintain interpersonal and team relationships to ensure stable working environment and achievement of team objectives.

• Adhere to statutory regulations, organisational standards, policies, and procedures. Report non-compliance and implement corrective actions to ensure compliance.

Overview

The QC Supervisor is responsible for organizing daily activities, maintaining and troubleshooting lab instruments, and communicating QC affairs between departments.

Responsibilities

1. Guide and oversee day-to-day QC activities.
2. Authorize release of raw materials and finished goods, as applicable.
3. Coach and train team members.
4. Report major batch record variances.
5. Create and follow procedures, SOPs, and forms.
6. Maintain proper quality documentation.
7. Generate and review Certificates of Analysis.
8. Support Change Management processes.
9. Ensure adherence to lab procedures and safety protocols, applying 5S+1.
10. Participate in internal and external audits.
11. Collect samples, prepare shipments, and inspect raw materials and finished goods.
12. Interpret data and perform raw material testing.
13. Enter data daily and generate reports in ERP systems.
14. Perform lot tracing and report nonconformities following SOPs.
15. Generate nonconformity reports and communicate with stakeholders.
16. Coordinate with QA for rework plans.
17. Review supplier qualification tests.
18. Investigate CAPA issues.
19. Write and approve method validation protocols.
20. Contribute to reports and internal presentations.
21. Lead QC projects and participate in PIP meetings.
22. Participate in or lead product scale-up activities.
23. Identify opportunities for process innovation.
24. Work closely with cross-functional teams.
25. Contribute to budgeting, as applicable.
26. Maintain compliance with food/feed safety regulations.

Qualifications

Education:

• Bachelor’s Degree (4-year) in a related field with 5+ years of experience.
• Master’s Degree with 2+ years of experience.
• Previous management experience is preferred.

Essential Skills and Experience

• Advanced knowledge of lab instruments.
• Strong communication skills.
• Proficiency with computer systems (MS Office, M3, LIMs).
• Attention to detail and project management skills.
• Familiarity with SPC principles.
• Ability to operate, troubleshoot, and maintain lab equipment.
• Team interaction skills.
• Lifelong learning attitude and servant leadership.

Overview

Our client is a major force in the furniture manufacturing sector, known for exceptional craftsmanship and consistent innovation. The organization values quality and continuous improvement, maintaining robust production operations. They provide a professional setting focused on development and excellence.

• Carry out and oversee quality inspections during all production stages
• Ensure compliance with internal standards and customer requirements
• Collaborate with production teams to address and resolve quality issues
• Train and mentor junior Quality Control staff
• Maintain accurate quality records and inspection reports
• Identify trends and support quality improvement initiatives
• Provide hands-on support on the shop floor
• Liaise with other departments to ensure consistent quality practices
• Investigate root causes of defects and recommend corrective actions
• Monitor production processes for adherence to quality protocols
• Participate in internal and external quality audits
• Assist in updating and developing quality control procedures
• Promote a culture of excellence and continuous improvement
• Support the development and implementation of new quality initiatives
• Communicate quality expectations to the wider team

• Relevant qualification in quality management or related field
• Minimum 3 years experience in quality control, preferably in furniture or manufacturing
• Experience with leather and fabric upholstery (advantageous)
• Previous supervisory or mentoring experience
• Strong understanding of quality control standards and procedures
• Only shortlisted candidates will be contacted

R18 000 - R20 000 Cost to Company

Overview

Job Vacancy: Quality Control Inspector. To support production by validating their ability to produce outputs with the best quality in a safe working environment / operation through conducting inspections at appropriate stages throughout production runs using measurement instruments and fixed gauges as well as recording of results from these inspections as per relevant instructions. Furthermore, by assisting in process control training, improvement and problem solving.

Quality Control Inspector

Simon Letsoko

Mid-Career (2 - 4 yrs exp)

3 to 4 Months (possible going perm)

• Matric with an overall pass mark of minimum 50% and the following subjects as a minimum: English, Mathematics (Normal, NOT Literacy), Science
• Tertiary Education (Advantageous): Certificate in Mechanical Engineering or Similar Field of Study; OR Certificate in any Quality Assurance / Quality Control Field of Study
• Proven Knowledge in: Use of various measurement instruments; Use of Shadow Graphs, Load Indicators and Scales; Use of Basic functions in Microsoft Word & Excel; Interpretation of Product Drawings including customer specific requirements; Basic mathematical skills

• With Formal Education: Minimum 6 Months experience in a Manufacturing Environment
• Without Formal Education: Minimum 2 Years’ experience in a Manufacturing Environment of which a minimum of 1 year was in a QC inspector role

• Good Communication Skills – Verbal & Written
• Good Reading Skills
• Excellent Visual Attention to Detail
• Good Analytical Skills

• Verify accuracy and condition of measuring instruments
• Validate the First Off products as produced by Setters using measuring instruments and record results from these inspections as per relevant instructions
• Assist in Metrology related aspects pertaining to R&D
• Ensure that production personnel have the relevant QC resources to perform all their verification duties accurately
• Set up of Gauges to be used by operators during production, including the verification of dimensions and condition as per relevant instructions
• Conduct training on verification activities required by production personnel
• Audit the effective operation of production activities
• Continuously conduct patrol inspections to verify the conformance of processes against required standards as per relevant instructions
• Visually inspect the fit and form appearance of products against requirements as per relevant instructions
• Conduct line clearances of scrap parts produced by setters and operators as well as recording of scrap quantities as per relevant instructions
• Stop relevant production machines and raise Non-Conformance Reports where processes are deviating from the required standards
• Isolate or quarantine and control non-conforming parts as per relevant instructions
• Update and file relevant QC records as required
• Maintain proper housekeeping standards as per relevant requirements and instructions
• Work in a manner that does not present risk to the health & safety of any person on site
• Conducting destructive Tests using pressurized equipment on components, sub-assemblies and assemblies on a frequent basis as required by the process
• Assessing the conformity of products tested based on Failure Load and Failure Mode
• Entering of results as data into Data Entry Software
• Drawing conclusions and making recommendations or escalations based on data analysis
• Compiling and communicating Reports and COC’s from results
• Managing Testing Equipment, Method, and Control as well as the Setup configuration
• General administration, reporting and updating relevant registers as may be required
• Ad-Hoc destructive testing and reporting as may be required from time to time
• Carry out any reasonable and legal instructions as operationally required by this role

• Portray a safety conscious attitude
• Maintain and promote the good reputation of the Company
• Ability to work alone and as part of team
• Ability to work under extreme pressure
• High level of Attention to Detail
• Willingness to work overtime from time to time as required at short notice
• Sober Habits
• Some tasks involve a high level of Walking
• Role requires the lifting and manoeuvring of heavy parts and equipment
• Role requires a high level of standing and physical work
• Role requires a high level of reports administration

Position: Quality Control Lead

Location: South Africa

Industry: Renewable Energy (Wind)

Type: Full-time | Local Candidates Only

We are recruiting on behalf of a leading renewable energy powerhouse in South Africa. This role is ideal for an experienced Quality Control professional with a strong background in Independent Power Producer (IPP) projects and wind energy.

• Minimum of 5 years’ experience working on IPP renewable energy projects
  

• Proven experience in wind energy (5+ years)
  

• Owner’s Engineer experience is highly advantageous
  

• In-depth knowledge of quality control standards and procedures in energy infrastructure
  

• Strong understanding of HSE and compliance frameworks
  

• South African citizenship is required for this position
  

• Oversee and implement quality assurance protocols across project phases
  

• Ensure all work complies with project specifications, standards, and regulations
  

• Liaise with contractors, project managers, and engineering teams to maintain quality
  

• Conduct inspections, audits, and manage non-conformances
  

• Report and document findings with clear recommendations
  

Send your updated CV to

For more roles, visit:

Join to apply for the Quality Control Inspector role at ExecutivePlacements.com - The JOB Portal

3 days ago Be among the first 25 applicants

Join to apply for the Quality Control Inspector role at ExecutivePlacements.com - The JOB Portal

Get AI-powered advice on this job and more exclusive features.

Recruiter:

West Coast Personnel

Job Ref:

JAAD -1

Date posted:

Tuesday, June 3, 2025

Location:

killarney gardens, Western Cape, South Africa

Salary:

R10,000 per month

SUMMARY:

Quality Control Inspector

POSITION INFO:

Job Summary:

The Quality Control Inspector in the Plastic Injection Moulding Department is responsible for inspecting products, materials, and processes to ensure they meet quality standards and comply with industry specifications. This role includes assessing the quality of incoming materials/products, in-process products, and finished items, ensuring that defective products are identified and corrective actions are recommended.

Responsibilities:

Product Inspection:

• Perform regular quality checks on raw materials, in-process products, and finished goods to verify they meet established quality standards.
  
  

• Monitor and document injection moulding processes to ensure consistency and compliance with specifications.
  
  

• Identify defects or deviations from specifications, document findings, and report to the Quality Control Team Leader.
  
  

• Maintain accurate and detailed inspection records, including product samples and any non-conformance findings.
  
  

• Conduct and document standard tests, such as dimensional checks, visual inspections, and functional tests, using precision measuring equipment (e.g., gauges).
  
  

• Provide feedback on potential areas for improvement to production teams and support corrective action implementation.
  
  

• Work closely with production and engineering teams to address quality issues and implement solutions.
  
  

• Assist in training production staff on quality standards and inspection procedures as required.
  
  

• Ensure compliance with safety and health regulations during inspections and handling of materials.
  
  

• Matric certificate or equivalent
• Minimum 1 year of experience in quality inspection or manufacturing (injection moulding preferred)
• Familiarity with injection moulding processes and common plastic defects (e.g., flash, sink, warping)
• Ability to read and interpret technical drawings, part specifications, and inspection standards
• 1 year experience in the use of precision measuring tools, e.g.
• Vernier callipers
• Micrometres
• Height gauges
• Go/no-go gauges
• Basic understanding of quality standards (e.g., ISO 9001) and inspection procedures
• Strong attention to detail and ability to spot visual and dimensional defects*
• Physical Requirements:
• Ability to stand for long periods
• Lift parts or tools
• Comfortable working in production floor environment (hot, noisy, etc.)
• Basic computer skills for data entry and reporting*
• Good communication skills to report findings and work with production staff
  
  
  
  

• Seniority level Entry level

• Employment type Full-time

• Job function Quality Assurance
• Industries Advertising Services

Referrals increase your chances of interviewing at ExecutivePlacements.com - The JOB Portal by 2x

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

Summary:

Perform quality control checks on products before processing to ensure compliance with company standards and supplier requirements. Conduct inspections on all item being processed and address defects, deviations, or non-conformities.

Key Responsibilities:

1. Inspect products, materials before processing stage.
2. Ensuring daily demand targets of parcels being processed are met.
3. Identify and isolate non-conforming products or materials. Notify production staff and manager of quality issues.
4. Collaborate with production teams to resolve quality problems.
5. Maintain a clean and organized work environment.

Requirements:

1. High school matric.
2. 1-2 years of warehousing operations experience and knowledge of quality control principles.
3. Analytical and problem-solving skills. Attention to detail and accuracy is crucial.
4. Effective communication and teamwork skills. Ability to work in a fast-paced environment.
5. Basic computer skills (e.g., data entry, reporting).