69 Packaging Engineer jobs in South Africa

2 days ago Be among the first 25 applicants

Gigengineer is looking for aPackaging Engineer to support the commissioning and technical optimisation of newbottling and packaging lines at its client's Durban facility. The role will involve engineering input into line layout, performance validation, and troubleshooting during the startup and stabilisation phases.

Key Responsibilities:

• Support installation, commissioning, and validation of packaging line equipment.
• Troubleshoot and optimise line performance to achieve desired OEE, efficiency, and quality targets.
• Work alongside OEMs and vendors to ensure the equipment's correct setup and calibration.
• Provide technical input on line layout, equipment interfacing, and utility integration.
• Collaborate with production, quality, and maintenance teams to ensure smooth handover and integration into operations.
• Document engineering reports, deviation logs, and performance data.

Qualifications & Experience:

• BSc / BEng / BTech inMechanical Engineering (or related).
• Minimum 7 years’ experience inpackaging engineering within theF&B, FMCG, or brewery sector .
• Hands-on experience with bottling and secondary packaging technologies.
• Familiarity with line balancing, changeover management, and process optimisation.
• Understanding of technical drawing, layouts, and P&IDs.
• Equipment commissioning & performance tuning
• Analytical thinking & root cause analysis
• Cross-functional collaboration
• Quality & process control

Interested candidates can apply directly to the job ad or by submitting their CV and a summary of relevant experience with the role title in the subject line to

Depending on the response, we may not be able to revert to all applicants individually; therefore, if you have not received a response within 8 weeks from your submission date, please consider your application unsuccessful.

• Seniority level Mid-Senior level

• Employment type Contract

• Job function Engineering and Information Technology
• Industries Technology, Information and Internet

Referrals increase your chances of interviewing at Gig Engineer by 2x

Durban, KwaZulu-Natal, South Africa 3 days ago

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

Position: Quality Control Lead

Location: South Africa

Industry: Renewable Energy (Wind)

Type: Full-time | Local Candidates Only

We are recruiting on behalf of a leading renewable energy powerhouse in South Africa. This role is ideal for an experienced Quality Control professional with a strong background in Independent Power Producer (IPP) projects and wind energy.

• Minimum of 5 years’ experience working on IPP renewable energy projects
  

• Proven experience in wind energy (5+ years)
  

• Owner’s Engineer experience is highly advantageous
  

• In-depth knowledge of quality control standards and procedures in energy infrastructure
  

• Strong understanding of HSE and compliance frameworks
  

• South African citizenship is required for this position
  

• Oversee and implement quality assurance protocols across project phases
  

• Ensure all work complies with project specifications, standards, and regulations
  

• Liaise with contractors, project managers, and engineering teams to maintain quality
  

• Conduct inspections, audits, and manage non-conformances
  

• Report and document findings with clear recommendations
  

Send your updated CV to

For more roles, visit:

Join to apply for the Quality Control Inspector role at ExecutivePlacements.com - The JOB Portal

3 days ago Be among the first 25 applicants

Join to apply for the Quality Control Inspector role at ExecutivePlacements.com - The JOB Portal

Get AI-powered advice on this job and more exclusive features.

Recruiter:

West Coast Personnel

Job Ref:

JAAD03062025-1

Date posted:

Tuesday, June 3, 2025

Location:

killarney gardens, Western Cape, South Africa

Salary:

R10,000 per month

SUMMARY:

Quality Control Inspector

POSITION INFO:

Job Summary:

The Quality Control Inspector in the Plastic Injection Moulding Department is responsible for inspecting products, materials, and processes to ensure they meet quality standards and comply with industry specifications. This role includes assessing the quality of incoming materials/products, in-process products, and finished items, ensuring that defective products are identified and corrective actions are recommended.

Responsibilities:

Product Inspection:

• Perform regular quality checks on raw materials, in-process products, and finished goods to verify they meet established quality standards.
  
  

• Monitor and document injection moulding processes to ensure consistency and compliance with specifications.
  
  

• Identify defects or deviations from specifications, document findings, and report to the Quality Control Team Leader.
  
  

• Maintain accurate and detailed inspection records, including product samples and any non-conformance findings.
  
  

• Conduct and document standard tests, such as dimensional checks, visual inspections, and functional tests, using precision measuring equipment (e.g., gauges).
  
  

• Provide feedback on potential areas for improvement to production teams and support corrective action implementation.
  
  

• Work closely with production and engineering teams to address quality issues and implement solutions.
  
  

• Assist in training production staff on quality standards and inspection procedures as required.
  
  

• Ensure compliance with safety and health regulations during inspections and handling of materials.
  
  

• Matric certificate or equivalent
• Minimum 1 year of experience in quality inspection or manufacturing (injection moulding preferred)
• Familiarity with injection moulding processes and common plastic defects (e.g., flash, sink, warping)
• Ability to read and interpret technical drawings, part specifications, and inspection standards
• 1 year experience in the use of precision measuring tools, e.g.
• Vernier callipers
• Micrometres
• Height gauges
• Go/no-go gauges
• Basic understanding of quality standards (e.g., ISO 9001) and inspection procedures
• Strong attention to detail and ability to spot visual and dimensional defects*
• Physical Requirements:
• Ability to stand for long periods
• Lift parts or tools
• Comfortable working in production floor environment (hot, noisy, etc.)
• Basic computer skills for data entry and reporting*
• Good communication skills to report findings and work with production staff
  
  
  
  

• Seniority level Entry level

• Employment type Full-time

• Job function Quality Assurance
• Industries Advertising Services

Referrals increase your chances of interviewing at ExecutivePlacements.com - The JOB Portal by 2x

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

Summary:

Perform quality control checks on products before processing to ensure compliance with company standards and supplier requirements. Conduct inspections on all item being processed and address defects, deviations, or non-conformities.

Key Responsibilities:

1. Inspect products, materials before processing stage.
2. Ensuring daily demand targets of parcels being processed are met.
3. Identify and isolate non-conforming products or materials. Notify production staff and manager of quality issues.
4. Collaborate with production teams to resolve quality problems.
5. Maintain a clean and organized work environment.

Requirements:

1. High school matric.
2. 1-2 years of warehousing operations experience and knowledge of quality control principles.
3. Analytical and problem-solving skills. Attention to detail and accuracy is crucial.
4. Effective communication and teamwork skills. Ability to work in a fast-paced environment.
5. Basic computer skills (e.g., data entry, reporting).

Position Overview:
We are seeking a highly motivated and detail-oriented individual to join our team as a Quality Control Officer. To ensure that all products and processes in the power cord manufacturing environment meet the highest quality standards and are compliant with the company’s quality management system (QMS). The QA Inspector is responsible for conducting in-process inspections, random testing, system audits, and ensuring corrective and preventive actions (CAPA) are implemented and documented.

Core Activities:

1. Quality Inspections and Testing:

• Conduct regular inspections of supplier raw materials and at various stages of the manufacturing process to ensure compliance with quality standards and specifications. Perform testing and measurements using calibrated equipment to verify product functionality, safety, and reliability. Record and document inspection results, test data, and any deviations from quality standards.

1. Quality Control Procedures:
   • Develop, implement, and maintain quality control procedures and work instructions for manufacturing processes. Establish sampling plans, acceptance criteria, and inspection methods to ensure consistent product quality. Monitor adherence to quality control procedures and provide guidance to production teams as needed.
2. Non-Conformance Management:
   • Identify and document non-conformities, defects, or deviations from quality standards during inspections and testing. Investigate root causes of non-conformities and implement corrective and preventive actions to address quality issues. Track and monitor the effectiveness of corrective actions to prevent recurrence of non-conformities.
3. "Continuous Improvement Initiatives:
   • Identify opportunities for process improvements and efficiency gains in quality control procedures and manufacturing processes. Participate in continuous improvement projects and quality improvement teams to enhance product quality and reduce defects. Use quality tools and methodologies such as Six Sigma, Lean Manufacturing, and Root Cause Analysis to drive process improvements."
4. Regulatory Compliance:
   • Ensure compliance with regulatory requirements and standards related to product quality, safety, and environmental protection. Stay updated on industry regulations, standards, and quality management system requirements to ensure adherence to all applicable requirements. Collaborate with regulatory affairs and compliance teams to address any quality-related regulatory issues or requirements.
5. Documentation and Reporting:
   • Maintain accurate records and documentation of quality control activities, inspection results, test data, and non-conformities. Prepare quality reports, trend analyses, and performance metrics to track quality performance and communicate findings to management and stakeholders. Ensure documentation complies with regulatory requirements and internal quality management system (QMS) standards.

Core Decisions:

1. Acceptance of Products:
   • Decide whether to accept or reject product batches based on quality inspection results and adherence to specifications.
2. Implementation of Corrective Actions:
   • Determine appropriate corrective actions to address non-conformities, defects, or deviations from quality standards identified during inspections and testing.
3. Approval of Supplier Quality:
   • Decide whether to approve or reject suppliers based on their ability to meet quality requirements and performance standards.
4. Changes to Quality Control Procedures:
   • Decide whether to update or revise quality control procedures, work instructions, or sampling plans to improve effectiveness and efficiency.
5. Investigation of Quality Incidents:
   • Determine the root causes of quality incidents, complaints, or customer returns and decide on appropriate corrective and preventive actions.
6. Resource Allocation for Quality Improvement:
   • Decide on resource allocation for quality improvement initiatives, such as training, equipment upgrades, or process improvements. Decide on actions to ensure compliance with regulatory requirements, standards, and quality management system (QMS) requirements.

Core Capabilities:

1. Technical Competence:
   • Understanding of manufacturing processes, materials, and specifications. Proficiency in using quality control tools, equipment, and testing methods relevant to electrical components.
   • Knowledge of industry standards and regulations related to electrical product safety and quality.
2. Analytical Skills:
   • Ability to analyze data, test results, and quality metrics to identify trends, patterns, and areas for improvement.
3. Problem-Solving Abilities:
   • Aptitude for identifying root causes of quality issues and implementing effective corrective and preventive actions.
   • Capacity to troubleshoot quality-related problems and make timely decisions to address them.
4. Attention to Detail:
   • Meticulous attention to detail is crucial for conducting thorough inspections, testing, and documentation of quality control activities.
   • Ability to identify even minor deviations from quality standards and specifications.
5. Communication Skills:
   • Effective communication skills, both verbal and written, to convey quality expectations, report findings, and collaborate with cross-functional teams.
6. Quality Management System (QMS) Knowledge:
   • Familiarity with quality management principles and practices, including ISO 9001 standards and quality assurance methodologies.
   • Understanding of QMS requirements, documentation standards, and procedures for maintaining compliance.
   • Ability to ensure compliance with regulatory requirements and maintain up-to-date knowledge of industry regulations.
   • Commitment to continuous improvement and quality excellence through the implementation of quality improvement initiatives and best practices.
7. Teamwork and Collaboration:
   • Ability to collaborate effectively with production teams, engineers, quality assurance personnel, suppliers, and other stakeholders to achieve quality objectives.

Requirements:

• Quality Management or Quality Control qualification (National Diploma or higher preferred)
• Minimum 5 years of experience in the cable or electrical component manufacturing industry
• In-depth knowledge of cable manufacturing processes and quality requirements
• Proficient in the use of measurement tools (multi-meters, callipers, hi-pot testers, micrometres, etc.)
• Familiar with ISO standards (e.g., ISO 9001), Six Sigma, and Kaizen methodology
• Strong analytical and root-cause analysis skills
• Competent in drafting technical reports and documentation
• High attention to detail
• Ability to work independently and make objective decisions.
• Strong written and verbal communication skills
• Excellent organizational and time management abilities
• Uncompromising integrity and commitment to quality
• Initiative-taking, assertive, and able to stand firm under pressure.

To ensure that all materials and processes adhere strictly to customer specifications and internal quality standards, and to oversee the implementation and compliance of quality systems within the production division.

• PRINCIPAL ACCOUNTABILITIES

Accountabilities

Key Performance Indicators (KPIs)

Support in determining, negotiating, and agreeing upon in-house quality procedures, standards, and specifications

Clearly documented quality procedures aligned with ISO and customer expectations

Ensure adherence to quality, health, and safety standards across the plant

Zero non-conformities and audit failures; reduced incident reports

Monitor and ensure that manufacturing processes comply with defined quality standards

Regular inspections, compliance audits, and corrective actions documented and implemented

Conduct and document quality testing (pre-production, in-process, and final product)

100% completion of quality checklists and sampling reports

Follow established procedures, ISO guidelines, and maintain proper documentation

ISO compliance and audit-readiness at all times

Act as a catalyst for continuous improvement in quality and operational efficiency

Number of improvement initiatives implemented per quarter; measurable performance improvements

Lead, manage and motivate quality control staff to meet departmental goals

Achievement of departmental KPIs; performance reviews and development plans completed on time

Monitor and document critical control points (CCPs) regularly

Accurate and timely CCP logs with corrective actions recorded

Ensure customer requirements and service standards are understood and implemented

Positive customer feedback; low rate of quality-related returns or complaints

• INTERACTIONS

Internal :

• Production Department
• Purchase / Procurement
• Planning and Production Control (PPC)
• Maintenance and R&D (as applicable)

External :

• Customers and end-users (for quality audits, complaints, and resolution)
• Raw material vendors and external testing laboratories
• Certification bodies (for ISO or regulatory audits)
• SKILLS AND KNOWLEDGE

Educational Qualifications :

• Post Graduate Diploma in Plastics Technology / CIPET or
• Diploma in Plastics / Mechanical Engineering or related field

Relevant Industry Experience :

• 5–7 years of experience in a Packaging Manufacturing Industry with hands-on exposure to Quality Control and Assurance

Technical Skills :

• In-depth knowledge of packaging processes (lamination, extrusion, printing, slitting, sealing)
• Experience with lab instruments and testing procedures (tensile strength, bond strength, GSM, COF, WVTR, etc.)
• Proficiency in ISO 9001 / ISO 22000 / HACCP and other quality management systems
• Skilled in preparing audit documentation, process documentation, and quality SOPs

Behavioral Skills :

• Strong analytical and problem-solving ability
• Detail-oriented with a commitment to accuracy and process compliance
• Effective communicator and team leader
• Ability to manage cross-functional teams under pressure

Quality Control Assistant • Centurion, South Africa