11 Machinists jobs in Alberton
Machine Operator
Posted today
Job Viewed
Job Description
Machine Operators
1. Complying with safety, quality and operational procedures
2. Understanding requirements of the work order
3. Complying with stacking procedure and understanding demarcated areas (specially incoming &finished goods).
4. Cleaning machine and organizing the necessary equipment for the job
5. Check material if it is correct for the job as per "Material issued to work order report" Form.
6. Sign for every roll before use, if the roll doesn't appear on the form report it to the setter or QC personnel.
7. Preparing packaging (check for, counter set up, Quantity needed per box and remarks on work order)
8. Ensure that the job is approved before production(setter to be present till machine is running correctly)
9. Operate machine and pack product (load the machine and run, check counter)
10. Check quality of product.
11. Report any problem to your supervisor/setter can be mechanical or quality
12. Inspect final product, ensuring that all boxes are stamped, empty boxes are displayed, half and extra boxes are labeled correctly
13. Remove waste and clean machine (all recyclable off cuts in to clean black bins and non-recyclable in to orange)
14. Mark all extra rolls with work order number and take them under the stairs by the lift.
NB. - work conscientiously and efficiently.
Job Type: Full-time
Pay: R33,75 - R38,05 per hour
Expected hours: 40 per week
Education:
- High School (matric) (Required)
Experience:
- Machine factory : 1 year (Required)
Language:
- Must have good English communication (Required)
- Must Read and write in English (Preferred)
Location:
- Alrode, Gauteng (Required)
Work Location: In person
Bending Machine Operator
Posted 18 days ago
Job Viewed
Job Description
Reports to: Operations
Seniority Level: Mid-Career (2-4 yrs exp)
Type: Temp
Responsibilities
- Machine Setup
Select and install appropriate dies, tools, and clamps on bending machines, including those with CNC systems. - Material Preparation
Accurately position metal workpieces (sheet, bar, pipe, or tube) using end stops or guides to ensure correct alignment for bending. - Machine Operation
Operate the bending machine to form metal components to specified angles and contours, following work orders and drawings. - Quality Control
Inspect fabricated parts to confirm compliance with specifications, tolerances, and quality standards. - Maintenance
Perform routine maintenance such as lubrication and minor repairs to ensure consistent machine performance and prevent downtime. - Safety & Compliance
Adhere to all company safety procedures, environmental guidelines, and health regulations. - Documentation
Maintain accurate records of machine settings, production output, and completed tasks.
- Blueprint Reading
Ability to read and interpret technical drawings and work orders. - Machine Operation
Skilled in operating both manual and CNC-controlled bending machines. - Technical Aptitude
Strong mechanical understanding for machine setup, tool selection, and troubleshooting. - Attention to Detail
Commitment to producing high-quality parts that meet exact specifications. - Physical Stamina
Capable of lifting materials and standing for extended periods in a manufacturing setting. - Basic Math Skills
Proficient in measuring, calculating angles, and interpreting dimensions.
CNC Machine Operator
Posted today
Job Viewed
Job Description
- CNC Machine Operators is required by a Manufacturing company in Boksburg
- Matric with pure maths
- Should be technical minded and have some technical schooling background.
- School leavers will also be considered.
- Must be willing and able to work shifts, which could include either day or night shift and also weekends if and when required.
- Must be situated in the Boksburg are with own transport.
- Must be bilingual - Afrikaans and English.
- Package & Remuneration will be discussed in interview.
- Please send detailed CV in word Format, together with proof of qualifications to
Job Type: Full-time
Work Location: In person
Machine Operator-2
Posted today
Job Viewed
Job Description
It's fun to work in a company where people truly BELIEVE in what they're doing
Machine Operator Responsibilities
Incumbent must be willing to work additional hours, as and when required, must be mechanically minded and have a sense of urgency about him/her. Adherence to policies and procedures is non negotiable. Being part of a team entails additional duties beyond operating machinery.
1 Operate machines according to Standard Operating Procedures
2 Adhere to safety instructions and procedures
3 Adjust machines according to running requirements
4 Maintain supply of packaging material for a quick change-over
5 Load relevant programs for products.
6 Adjust machine for optimal performance
7 Complete required quality and production control forms
8 Change parts on machines as necessary for different products
9 Ensure correct packaging is used
10 Continuously observe machine functions with respect to
Seal integrity, film quality,
11 Adhere to PPE standards
12 Liaise with quality department on quality issues
13 Liaise with maintenance department on mechanical issues
14 Ensure correct information regarding downtime, machine operation,
Packaging usage, waste and machine stoppages is noted for further processing.
15 Keep machines clean
16 Keep area surrounding machines clean
17 Identify, Raise and assist in closing potential safety risks and observations
18 Adhere to food safety policies
19 Generate ideas to improve performance.
Job Requirements
National senior certificate (Matric)
Must be medically fit
Minimum 1 – 2 years of experience in a warehouse or manufacturing environment; experience in FMCG, food processing, or packaging industry is an advantage.
In accordance with the employment equity plan of Tiger Brands and its employment equity goals and targets, preference may be given, but is not limited, to candidates from under-represented designated groups.
Junior Machine Operator
Posted today
Job Viewed
Job Description
*Reports to: Shift Leader
Salary Range : R R
Purpose of the Position *
The Junior Machine Operator is responsible for operating and monitoring extrusion blow moulding (EBM) machines and related equipment to ensure that the final product meets all quality requirements in line with company standards and procedures.
Main Tasks And Responsibilities
- Operates extrusion blow moulding machines and equipment to produce bottles or containers according to specifications
- Monitors and assist with adjustments with machine settings and automatic control devices (e.g., leak tester, deflashing system, vision system, palletizer) to maintain consistent product quality
- Immediately informs the technical department of any mechanical, electrical, or process issues and records outcomes as required
- Assists in technical operations, including colour changes, mould changes, parison adjustments, blade and equipment cleaning, and line set-up
- Packs finished products using the correct packaging materials (e.g., boxes, trays, bags), stacks and labels pallets for storage or dispatch
- Supplies raw materials and packaging to the machine using manual and/or electric forklifts
- Feeds hoppers and loaders with raw material (resin, regrind, additives) as per production requirements
- Conducts in-process product inspections (visual checks, weight checks, dimensional measurements) in line with the product control plan and records results accurately
- Sorts and separates defective or damaged products for recycling or disposal
- Participates in continuous improvement activities to reduce waste, improve efficiency, and enhance product quality
- Maintains a clean, safe, and organized work area in compliance with workplace hygiene and safety standards
Technical Skills
- Applied knowledge of measuring instruments and product quality checks
- Ability to operate manual and electric forklifts safely
- Basic understanding of mechanical, pneumatic, hydraulic, and electrical systems used in EBM equipment
- Basic knowledge of World Class Manufacturing (WCM) principles
- Basic understanding of Health, Safety, and Environmental (HSE) rules and practices
Personal Skills
- Accountability – Take ownership for actions, results, and mistakes
- Problem-Solving – Apply practical, resourceful solutions without compromising quality
- Resilience & Work Ethic – Cope with challenges, remain focused under pressure, and consistently deliver
- Teamwork – Build trust, contribute positively to team morale, and foster a stable work environment
Education And Experience
- Grade 12 - Matric
- Prior experience in extrusion blow moulding operations preferred
Junior Machine Operator
Posted today
Job Viewed
Job Description
Boksburg, Gauteng, South Africa
Full Time
South Africa
Entry Level
Junior Machine Operator (Extrusion Blow Moulding Machine)
Reports to: Shift Leader
Salary Range : R R
Purpose of the Position
The Junior Machine Operator is responsible for operating and monitoring extrusion blow moulding (EBM) machines and related equipment to ensure that the final product meets all quality requirements in line with company standards and procedures.
Main Tasks and Responsibilities
- Operates extrusion blow moulding machines and equipment to produce bottles or containers according to specifications.
- Monitors and assist with adjustments with machine settings and automatic control devices (e.g., leak tester, deflashing system, vision system, palletizer) to maintain consistent product quality.
- Immediately informs the technical department of any mechanical, electrical, or process issues and records outcomes as required.
- Assists in technical operations, including colour changes, mould changes, parison adjustments, blade and equipment cleaning, and line set-up.
- Packs finished products using the correct packaging materials (e.g., boxes, trays, bags), stacks and labels pallets for storage or dispatch.
- Supplies raw materials and packaging to the machine using manual and/or electric forklifts.
- Feeds hoppers and loaders with raw material (resin, regrind, additives) as per production requirements.
- Conducts in-process product inspections (visual checks, weight checks, dimensional measurements) in line with the product control plan and records results accurately.
- Sorts and separates defective or damaged products for recycling or disposal.
- Participates in continuous improvement activities to reduce waste, improve efficiency, and enhance product quality.
- Maintains a clean, safe, and organized work area in compliance with workplace hygiene and safety standards.
Technical Skills
- Applied knowledge of measuring instruments and product quality checks.
- Ability to operate manual and electric forklifts safely.
- Basic understanding of mechanical, pneumatic, hydraulic, and electrical systems used in EBM equipment.
- Basic knowledge of World Class Manufacturing (WCM) principles.
- Basic understanding of Health, Safety, and Environmental (HSE) rules and practices.
Personal Skills
- Accountability – Take ownership for actions, results, and mistakes.
- Problem-Solving – Apply practical, resourceful solutions without compromising quality.
- Resilience & Work Ethic – Cope with challenges, remain focused under pressure, and consistently deliver.
- Teamwork – Build trust, contribute positively to team morale, and foster a stable work environment.
Education and Experience
- Grade 12 - Matric
- Prior experience in extrusion blow moulding operations preferred.
Laundry Machine Operator
Posted today
Job Viewed
Job Description
Overview
We are seeking a dedicated Laundry Machine Operator to join our team. The ideal candidate will play a crucial role in maintaining the cleanliness and organization of our laundry operations.
Duties
- Operate laundry machinery such as washers and dryers
- Inspect linens for stains or damages
- Ensure proper storage of clean linens and uniforms
- Maintain inventory of supplies and request replenishment when needed
- Adhere to all safety and sanitation policies
Requirements
- Experience in cleaning, preferably in a laundry or similar setting
- Knowledge of laundering techniques and dry cleaning processes is a plus
- Ability to work efficiently in a fast-paced environment
- Attention to detail to ensure high-quality results
- Physical stamina to stand for extended periods and lift heavy loads
Job Type: Full-time
Work Location: In person
Be The First To Know
About the latest Machinists Jobs in Alberton !
Laser Cutting Machine Operator
Posted 18 days ago
Job Viewed
Job Description
We are seeking a skilled and detail-oriented Laser Cutting Machine Operator to join our manufacturing team. The ideal candidate will be responsible for setting up, operating, and maintaining laser cutting machines to produce precision components based on technical drawings and specifications. If possible, Bevel Cutting will also be an advance if the operator can utilize.
Key Responsibilities:
- Machine Setup & Operation:
- Set up and program laser cutting machines using appropriate programs, gases, nozzles, and fixtures for specific materials and job specifications.
- Monitor machine performance to ensure consistent and accurate cutting operations.
- If possible, Bevel Cutting will also be an advance.
- Candidate must also do his own Nesting and Planning.
- Material Handling:
- Safely load and unload raw materials and finished parts.
- Follow proper handling and storage procedures to prevent material damage.
- Blueprint Interpretation:
- Read and interpret blueprints, mechanical drawings, and technical documents to ensure precise cuts and part dimensions.
- Quality Control:
- Perform in-process and final inspections using measuring tools (calipers, micrometers, etc.).
- Identify and report defective materials or issues in production.
- Machine Maintenance:
- Conduct routine maintenance and cleaning of equipment.
- Adjust laser settings (beam intensity, focus, etc.) and troubleshoot minor mechanical or software issues.
- Safety Compliance:
- Follow all workplace safety policies, procedures, and regulations.
- Consistently wear appropriate personal protective equipment (PPE).
- Production Documentation:
- Maintain accurate production logs, inspection records, and material usage reports.
- Proven experience operating laser or plasma cutting machines in a manufacturing environment.
- Strong knowledge of laser cutting parameters, materials, and machine functions.
- Ability to read and interpret blueprints, CAD files, and mechanical drawings.
- Proficient in using precision measuring instruments (e.g., calipers, micrometers).
- Familiarity with CAD/CAM software and basic computer skills.
- Excellent attention to detail and a commitment to producing high-quality work.
- Strong troubleshooting, problem-solving, and communication skills.
- Willingness to perform maintenance tasks and support continuous improvement efforts.
Production Line Machine Operator
Posted today
Job Viewed
Job Description
We are seeking a skilled
Production Line Machine Operator
to join our manufacturing team. The ideal candidate will be responsible for operating, maintaining, and troubleshooting production machinery to ensure efficient workflow and high-quality output. This role requires attention to detail, mechanical aptitude, and adherence to safety and quality standards.
Duties & Responsibilities
- Operating Equipment
: Manage machines and equipment along the production line, ensuring proper functionality. - Monitoring Process: S
upervise operations to detect and troubleshoot issues quickly. - Quality Control
: Inspecting finished products to make sure they meet specifications and standards. - Maintaining Machines
: Performing routine maintenance and reporting faults or breakdowns. - Assembly Work
: Assemble parts and contribute directly to the repair process. - Following Safety Protocols
: Adhering to workplace safety rules and keeping the environment hazard-free. - Record Keeping
: Documenting production data, machine performance, or any incidents. - Experience in a Bearing environment will be an advantage
Education & Experience:
- High school diploma or equivalent (GED).
- Technical or vocational training in machinery operation or a related field is a plus.
- Previous experience as a machine operator or in a manufacturing/production environment preferred.
Technical Skills:
- Knowledge of machine operations, troubleshooting, and maintenance.
- Ability to read and interpret technical manuals, blueprints, or schematics.
- Familiarity with safety procedures and quality control standards in a production setting.
- Basic math and computer skills for recording production data.
Soft Skills:
- Strong attention to detail and problem-solving abilities.
- Ability to work efficiently in a fast-paced, team-oriented environment.
- Good communication skills for coordinating with team members and supervisors.
- Adaptability and willingness to learn new machinery and processes.
Physical Requirements:
- Ability to stand for long periods and perform repetitive tasks.
- Strength to lift and move materials or products as required (typically up to 50 lbs).
- Comfortable working in environments with noise, heat, or cold, depending on the industry.
Package & Remuneration
- Contract:
Immediately - June 2026 Months - Salary:
R55 per hour - Location: Jet Park Gauteng
Only applicants that meet the minimum requirements will be considered
Interested?
If interested, please
apply directly through
email us directly at
N.B If emailing us directly
,
remember to insert
"Production Line Machine Operator"
in the email
subject line
, for consideration, and state which area you are applying for.
Starke Ayres: Machine Operator
Posted today
Job Viewed
Job Description
Description
Starke Ayres is the foremost African specialist and global supplier of premium vegetable, flower and lawn seed varieties – both for commercial and home garden planting.
The following position has become available for a Machine Operator, based in our Cleaning Plant in Kempton Park.
Responsibilities
- To ensure that seed is received at the Workstation, cleaned and / or packed down in line with company policies, procedures and quality specifications by utilising the prescribed equipment, and that packed seed is presented for final batch packing and check weighing.
- Unpacking and / or off-loading of containers with seed by operating a forklift truck with a valid forklift operator's license.
- Assist with the unpacking of containers with seed in cases where the operation of a forklift truck is not a requirement.
- Assist with accurate checking and counting of stock received for cleaning and / or down packing.
- Thoroughly clean all equipment before and after each operation, ensuring no traces or residue of seed lots previously worked / packed.
- Present packed seed for batch packing and check weighing.
- Maintain high levels of factory hygiene in and around these working areas.
- Sign off own area of responsibility once each action / process has been completed correctly (when assistance is required to operate equipment).
- Present documentation (Job Card) to Manager / Supervisor for final reconciliation, approval and signing off.
- Check the calibration and setting of all machines and equipment prior to packing / cleaning.
- Ensure that packing / cleaning is scheduled and prioritized in line with planning schedule and customer requirements.
Requirements
REQUIREMENTS:
- Grade 12 National Senior Certificate
- Previous experience as a general worker (essential)
Work Level
Junior
Job Type
Permanent
Salary
Market Related
EE Position
No
Location
Kempton Park