26 Laboratory Research jobs in South Africa

• Check paint quality. Crosshatch check
• Responsible for Chemical Stores in paint shop
• Log of all data
• CMM Inspection in metrology measurement.
• Ordering of chemicals and ensure correct test are carried out by supplier
• Start up and controlling of degreasing machine
• Oven temperature and conveyer speed of Gel Oven, using the correct measurement equipment. (Squirrel).
• Part set-up in measurement holding fixture.
• Start up and shut down of paint shop
• Conveyor speed and oven temperature in paint shop, using the correct measuring equipment
• Salt spray test
• Update and maintain all control charts in their areas of responsibility

• NQF Level 4 / Grade 12
• Tertiary studies in Laboratory Chemicals
• Minimum 1 year experience in Laboratory environment
• Minimum 1 year experience in a metrology part measurement.
• CMM Report reading and analysis added an advantage.
• Must not be colour blind

• Chemicals
• SPC and Data capture
• Computer literate
• Advance computer skills
• Communication skills
• Problem solving
• Attention to details
• Reporting

To provide technical support to the academic staff in the Department of Mechatronics.

KEY PERFORMANCE AREAS

• Oversee the installation, servicing, upgrading, and maintenance of specific electronic communications equipment.
• Set up electronic communications and general-purpose electrical / electronic engineering laboratories for student practicals and projects.
• Coordination of undergraduate practicals with other departmental technicians.
• Source components and either repair faulty 3D printers, electronic signal and measuring equipment or arrange for external repairs if the warranty has expired.
• Coordinate repairs or replacement with suppliers regarding defective equipment covered under warranty.
• Maintain and support mechanical / electrical / electronic engineering equipment for undergraduate and postgraduate use, ensuring adequate consumables are available for tests, consultations, and research.
• Assist in preparing annual budgets, manage the procurement of components and equipment within budget limits, and handle order processing through the ITS financial system.
• Work closely with suppliers and academic staff to ensure accurate ordering and receipt of specified items.
• Maintain documentation related to the procurement of components and stock received, while coordinating with NMU’s procurement department.
• Support academic staff by supervising student practical tests.
• Provide daily assistance to students with practical assignments, projects, and troubleshooting technical issues.
• Manage student resources, including issuing and tracking components and supervising students in hazardous environments.
• Inventory, track and manage academic assets within specified Departmental labs together with University Asset department.
• Offer technical support for special events such as Open Day, short courses, and research activities.
• Identify, report, and help resolve unsafe working conditions, by managing Health and Safety in the department and act as the SHE Representative for the department.
• Ensure adherence to equipment safety and operational procedures, test and regulatory codes. Ensure general laboratory safety standards are in place and always adhered to by all users.
• Ensure laboratories remain organized and clean after use, report building maintenance issues via the ITS system, and follow up on logged faults.

CORE COMPETENCIES

• An in-depth knowledge of mechanical, electronic communication systems and procedures as well as the use of digital measuring equipment (oscilloscope, spectrum analyzer, multimeter) and various types of electronic signal generating equipment.
• Sound knowledge of the Microsoft Office suite, including Word, Excel and PowerPoint.
• Sound knowledge of software used for electrical circuit design and simulation (such as Proteus or MultiSim)
• Sound knowledge of electrical engineering principles.
• Strong verbal and written communication skills.
• Ability to work unsupervised.
• Proven leadership skills.

REQUIREMENTS

In order to be considered, applicants must have :

• M+3 Mechanical Engineering or M+3 Electrical Engineering Degree or Mechatronics Degree or equivalent.
• Minimum of three (3) years’ relevant experience in which competency has been gained.

Preference will be given to candidates registered with the Engineering Council of South Africa (ECSA)

DISCLAIMER : Nelson Mandela University is a designated employer committed to pursuing excellence, diversity, inclusion, and redress in achieving its employment equity targets. Preference will be given to suitably qualified (Race and Gender) candidates in accordance with the University's employment equity targets. No applications will be accepted after the closing date Friday, 25 July 2025.

Lab Technician

Market-related package

Dar es Salaam, Tanzania

Are you a skilled technician with a passion for renewable energy and solar technology? We’re looking for a Lab Technician to join our dynamic technical team in Dar es Salaam and play a critical role in supporting hardware testing, firmware updates, and battery maintenance for cutting-edge solar products.

Key Responsibilities:

• Test and fault-find returned solar equipment

• Conduct firmware updates and simulated product tests

• Maintain and charge battery stock; track charge cycles

• Prepare detailed reports on product faults and root cause analysis

• Collaborate with technical team members and support ongoing QA processes

• Organize, label, and shelve returned hardware stock

• Maintain lab equipment and ensure a safe and clean working environment

Qualification and Experience:

• 3-year qualification (National Diploma, BTech, or BEng) in Electrical/Electronic Engineering

• Minimum 3 years’ experience in PV installation or technical support

• Strong knowledge of solar technology and lithium-ion battery storage

• Hands-on experience in testing and repairing solar products

• Proficient in English and Swahili; computer literate

• Familiar with key products like KODAK, Pylontech, and Victron

Primary purpose of the job:

To maintain and control all paint/phosphate-related processes, Washbay and Ovens to specific requisitions. Metrology environment awareness of CMM measurement.

Key Performance Areas:

Check paint quality. Crosshatch check

Responsible for Chemical Stores in paint shop

Log of all data

CMM Inspection in metrology measurement.

Ordering of chemicals and ensure correct test are carried out by supplier

Responsible for :

Start up and controlling of degreasing machine

Oven temperature and conveyer speed of Gel Oven, using the correct measurement equipment. (Squirrel).

Part set-up in measurement holding fixture.

Start up and shut down of paint shop

Conveyor speed and oven temperature in paint shop, using the correct measuring equipment

Salt spray test

Update and maintain all control charts in their areas of responsibility

Knowledge and Skills required:

Chemicals

SPC and Data capture

Computer literate

Advance computer skills

Communication skills

Problem solving

Attention to details

Reporting

Minimum Requirements

NQF Level 4 / Grade 12

Tertiary studies in Laboratory Chemicals

Minimum 1 year experience in Laboratory environment

Minimum 1 year experience in a metrology – part measurement.

CMM Report reading and analysis added an advantage.

Must not be colour blind

A well-established Orthodontic laboratory in Northcliff, Randburg is seeking a skilled and experienced Registered full-time Dental Technician to join their team. The ideal candidate will possess a strong understanding of Orthodontic/dental technology, digital techniques and be proficient in fabricating and adjusting a range of prosthetics. Excellent salary, 13th cheque and many additional perks available.

Job Purpose:

• Assure all Quality activities are performed according to BOS-, TS 16 949-, ISO 9000 standards and specific customer requirements. Develop and maintain test instructions.

Minimum Requirements:

• Matric/ Grade 12
• A Bachelor´s degree is required (or equivalent experience)
• 5+ years in the automotive industry, minimum 3 years in the quality area
• Specific Education and Training in Quality disciplines including as a minimum QS9000, Continuous Improvement, Total Quality Management, PPAP, FMEA, Control plans, DOE, and SPC are also required

Main Responsibilities:

• Plan and execute all necessary measurements in the lab
• Experience in writing measuring programmes
• Conduct various testing functions within the laboratory environment according to international standards
• Manage gauge and test equipment calibration system
• Perform calibration
• Perform R&R studies and wear trend analyses
• Assure compliance with ISO / IEC 17025 standard
• Manage Product Audits within the plant
• Ensure that continuous improvement is made in all Production MEQ Quality Deliverables (e.g.: RPPM, CPPM, IPPM, SPPM, Quality Costs, Customer Product Audits, and Warranty / JD Power)
• Ensure that customer and internally identified quality issues are resolved using the company problem-solving methods (8D Report, Problem Solving Document “PSD”, PCAD, Kepner-Tregoe, etc.)
• Prepare necessary corrective / preventive actions, follow up, verify and release actions
• Execute any reasonable request from the Quality Manager

• Undertaking the microbiological testing in the cream blending micro lab, including process swabs and ad hoc micro analysis.
• Ensuring that accurate results are available timeously.
• Carrying out daily laboratory functions and maintaining good laboratory practices.
• The position is aligned to packing product quality.
• Minimum of a BTech / Diploma / BSc Degree in Micro/Biotechnology, or a related field.
• At least 3-4 years experience within a production environment.
• Intermediate Excel level.
• Running of laboratory test methods to ensure continuous packed product QC.
• Preparation and processing of routine and ad hoc plant process samples.
• Communication and distribution of test results between plant sections.
• Adherence to the sampling plan.
• Running, maintenance, calibration and troubleshooting of laboratory analysis equipment.
• Laboratory consumable stock control.
• Assisting with troubleshooting and production and plant investigations.
• Recording results accurately, timeously and distributing this effectively.
• Working according to good laboratory practices.
• Maintenance of good laboratory practices.
• Organization and recording of retention samples.

Minimum requirements for the role:

• Must have a B. Sc. degree or equivalent in Chemistry, Material Sciences, or a related field.
• Minimum 3-5 years proven experience working with construction chemicals (grouts, adhesives, waterproofing, cementitious coatings, screed, epoxies, etc.) in a lab environment.
• Ability to work independently and manage multiple projects simultaneously.
• Strong written and verbal communication skills.
• Ability to work effectively across technical, regulatory, safety, and quality functions.
• Solid project management skills, including prioritization and workload management.
• Ability to compile reports and present results; willingness to participate in customer training days and virtual meetings with colleagues across regions.
• Resilient and capable of multi-tasking and working under pressure in a fast-paced environment.
• Demonstrated ability to adapt to complex or challenging situations while maintaining high standards.
• Solution-focused with a proactive approach to problem-solving and continuous improvement.
• Strong team player with a collaborative mindset.
• Comfortable working with numbers and data analysis.
• Skilled in producing professional emails, reports, and presentations using standard IT tools.
• Proficient in Microsoft Excel, Word, and PowerPoint.

Responsibilities:

• Applying and testing customer and internal project samples as per lab orders issued by the Technical Manager.
• Preparing samples for testing.
• Preparing test results in worksheets and signing off as "prepared by".
• Performing internal lab equipment calibration and intermediate checks.
• Being responsible for all lab equipment, including its maintenance and housekeeping.
• Participating in safety and quality audits as required.
• Updating lab capacity utilization and project status reports regularly.
• Managing stock inventory and raw materials, including samples.
• Following safety and quality standards according to Wackers guidelines and certifications, such as ISO.

Please note that after screening and shortlisting, further communication will be only with shortlisted candidates.