25 Interior Architecture jobs in South Africa

This function is performed in the Nortech International business division.

The immediate line of responsibility is to the Hardware Development Manager.

PURPOSE OF THE JOB

This post involves the research and development of new products for all of the four business units of Nortech, namely, Traffic, Parking, HeadCount, and Identipark. The job will involve developing products from initial concept through to a fully qualified, robust prototype using sound engineering principles. All products developed will be competing in international markets and, therefore, need to be of the highest quality standard. Interfacing with the Nortech production facility will be required to facilitate prototype builds, product testing, and final handover of the prototypes for Industrialisation.

QUALIFICATION & KEY COMPETENCIES REQUIRED

• Minimum BSc Degree in Electronic Engineering
• 3 to 4 years working experience in an electronics manufacturing environment
• Solid Hardware (electronics) experience in Analogue and Digital Design, including Schematic and PCB design.
• Solid Firmware development experience with Embedded Systems and C.
• Experience in Compliance Testing for Certifications of Product.
• Ability to write or modify PC Based Software in Visual Software Suites.
• Ability to plan a project accurately given a complete specification.
• CPLD, FPGA Design experience would be a plus
• DSP experience would be a plus.
• Ability to impart knowledge of product and train Industrial Engineering, Engineering Services, Test and Repairs Departments at handover.
• Ability to communicate clearly and professionally with departments within the company.
• An eagerness to embrace change and previously unused technologies.
• A responsible, self-motivated individual driven to meet deadlines.
• A meticulous individual with significant attention to detail.

THE DUTIES AND RESPONSIBILITIES FOR THE ROLE:

• Design of electronic products from concept, technology research, full technical product specification, design of schematic and PCB using Altium Designer, design of firmware – right through to a fully qualified, robust prototype.
• Walking the product through the production facility during the first-off prototype builds.
• Full spectrum bench-testing and verification, environmental verification and Electromagnetic Compliance verification.
• Liaising with the Industrial Engineering Department to get the product fully industrialised.
• Training of Engineering Services and Test and Repairs Departments to be able to support the final product.
• Firmware Development for Microcontrollers – generally done in C.
• Occasional PC Software development for testing purposes – these will generally be done in C / C++ / Visual Basic / Java / TCL.
• Liaising with the Software developers to integrate components into complete systems.
• Designing with DSPs, ARM Processors, 8051 based Microcontrollers, PICs, Motorola Micros, and FPGAs.

Activities connected with the Job:

• Schematic and PCB Design - 30%
• Firmware Development - 40%
• Documentation - 5%
• Interfacing with other departments - 5%
• Testing - 20%

Structure:

The Hardware Development Engineer will report to the Hardware Development Manager.

His/her interpersonal roles within the organisation will be:

• To liaise with the Sales and Marketing departments
• To liaise with Industrial Engineering staff
• To liaise with Engineering Services Staff
• To liaise with Planning and Production Staff

Success in the function is more objectively measured by:

• The ability to translate market requirements into a technical specification
• The ability to accurately plan projects to meet all specifications and requirements
• The ability to meet the deadlines set out in the project planning phase
• The quality and durability of products designed
• The ability to speedily resolve problems arising
• The ability to interface with other departments within the organisation

The candidate appointed to this position will be expected to:

• Manage himself/herself with little supervision
• Produce results in line with commitments and agreed objectives

This function is performed in the Nortech International business division.

The immediate line of responsibility is to the Hardware Development Manager.

PURPOSE OF THE JOB

This post involves the research and development of new products for all of the four business units of Nortech, namely, Traffic, Parking, HeadCount, and Identipark. The job will involve developing products from initial concept through to a fully qualified, robust prototype using sound engineering principles. All products developed will be competing in international markets and, therefore, need to be of the highest quality standard. Interfacing with the Nortech production facility will be required to facilitate prototype builds, product testing, and final handover of the prototypes for Industrialisation.

QUALIFICATION & KEY COMPETENCIES REQUIRED

• Minimum BSc Degree in Electronic Engineering
• 3 to 4 years working experience in an electronics manufacturing environment
• Solid Hardware (electronics) experience in Analogue and Digital Design, including Schematic and PCB design.
• Solid Firmware development experience with Embedded Systems and C.
• Experience in Compliance Testing for Certifications of Product.
• Ability to write or modify PC Based Software in Visual Software Suites.
• Ability to plan a project accurately given a complete specification.
• CPLD, FPGA Design experience would be a plus
• DSP experience would be a plus.
• Ability to impart knowledge of product and train Industrial Engineering, Engineering Services, Test and Repairs Departments at handover.
• Ability to communicate clearly and professionally with departments within the company.
• An eagerness to embrace change and previously unused technologies.
• A responsible, self-motivated individual driven to meet deadlines.
• A meticulous individual with significant attention to detail.

THE DUTIES AND RESPONSIBILITIES FOR THE ROLE:

• Design of electronic products from concept, technology research, full technical product specification, design of schematic and PCB using Altium Designer, design of firmware – right through to a fully qualified, robust prototype.
• Walking the product through the production facility during the first-off prototype builds.
• Full spectrum bench-testing and verification, environmental verification and Electromagnetic Compliance verification.
• Liaising with the Industrial Engineering Department to get the product fully industrialised.
• Training of Engineering Services and Test and Repairs Departments to be able to support the final product.
• Firmware Development for Microcontrollers – generally done in C.
• Occasional PC Software development for testing purposes – these will generally be done in C / C++ / Visual Basic / Java / TCL.
• Liaising with the Software developers to integrate components into complete systems.
• Designing with DSPs, ARM Processors, 8051 based Microcontrollers, PICs, Motorola Micros, and FPGAs.

Activities connected with the Job:

• Schematic and PCB Design - 30%
• Firmware Development - 40%
• Documentation - 5%
• Interfacing with other departments - 5%
• Testing - 20%

Structure:

The Hardware Development Engineer will report to the Hardware Development Manager.

His/her interpersonal roles within the organisation will be:

• To liaise with the Sales and Marketing departments
• To liaise with Industrial Engineering staff
• To liaise with Engineering Services Staff
• To liaise with Planning and Production Staff

Success in the function is more objectively measured by:

• The ability to translate market requirements into a technical specification
• The ability to accurately plan projects to meet all specifications and requirements
• The ability to meet the deadlines set out in the project planning phase
• The quality and durability of products designed
• The ability to speedily resolve problems arising
• The ability to interface with other departments within the organisation

The candidate appointed to this position will be expected to:

• Manage himself/herself with little supervision
• Produce results in line with commitments and agreed objectives

• BTech (Industrial Design)
• 3+ years experience in the following:
• Conceptualisation and problem-solving of various design criteria
• Proficiency in SolidWorks, CorelDRAW (Advantageous), and Microsoft Office (Compulsory).
• Proficiency with simulation software mechanical and thermal.
• Sketching, concept drawing, 3D presentation/rendering, technical drawing.
• Design experience in plastic fabrication, other manufacturing processes such as sheet metal, injection moulding, extrusion, vacuum forming, as well as printing.
• Producing efficient designs within the framework of simplicity, feasibility, cost efficiency, and accuracy.
• Compiling assemblies and detailed manufacturing drawings by acknowledged manufacturing standards.
• Issuing revisions and updates to the manufacturing drawings and material lists.
• Providing technical support during manufacturing processes.
• The following additional experience will be highly advantageous:
• Basic Electrical / Electronic knowledge and experience.

• Product Industrialisation
• Research Responsibilities
• Product Development and Deployment
• Administration and Reporting

For the innovative Electronic Design Engineer seeking their next challenge, dive into the realm of electronic building systems and devices tailored for construction and infrastructure projects. This role offers a unique opportunity to specialize in communication, security, and energy management systems, collaborating closely with architects and fellow engineers to seamlessly integrate electronic systems into diverse projects. Join us in shaping the future landscape of electronic design within the construction industry.

Job Description:

1. Develop bespoke electronic system specifications and designs tailored to meet client requirements and design standards.
2. Collaborate closely with architects, construction managers, and engineers to seamlessly integrate electronic systems into diverse projects.
3. Leverage CAD software and engineering tools to refine designs and ensure optimal functionality.
4. Conduct thorough feasibility studies and cost-benefit analyses for innovative electronic system techniques.
5. Maintain meticulous project documentation, including reports, drawings, and specifications.
6. Uphold stringent adherence to statutory, safety, reliability, and sustainability standards for electronic systems.
7. Coordinate effectively with the project team to ensure timely installation and commissioning within allocated budgets.
8. Identify and implement process improvements and cost-saving opportunities throughout project lifecycles.
9. Facilitate regular project team meetings, offering expert guidance and support as required.
10. Keep stakeholders abreast of project progress and any pertinent changes in milestones.

Skills & Experience:

• Minimum 10 years of experience in electronic engineering design.
• At least 5 years of experience must be post-registration and should be in planning and implementing electronic systems in production environments.
• Sound understanding of construction procedures, standards, and project management expertise.

Qualification:

• BSc, BEng, or BTech degree in Electronic Engineering.
• Registered with ECSA as a Professional Engineer.

Only South African Residents or individuals with a relevant South African work permit will be considered.

Contact WIEDAAD LEEMAN on , quoting the Ref: CTE025185.

Connect with us on and Register your CV to create a profile and to view all our Engineering recruitment vacancies.

Let us assist you with your career.

Reference: CTE025186-WLe-1

Become part of a renowned multi-disciplinary consulting firm in the role of a Senior Mechanical Engineer. Specialize in designing and developing construction projects, particularly focusing on building services like HVAC, fire compliance, and general mechanical building and plant design needs. Utilize your engineering expertise to guarantee that projects adhere to building safety, reliability, and sustainability criteria.

Job Description:

1. Develop mechanical building services specifications and designs to meet client needs and standards
2. Collaborate with architects and contractors to ensure design feasibility and client requirements are met
3. Utilize CAD, Revit, and BIM software for design creation and refinement
4. Conduct feasibility studies and cost-benefit analyses for new designs
5. Manage project documentation and ensure regulatory compliance
6. Coordinate with the project team for timely and quality project completion
7. Identify cost-saving opportunities and propose improvements
8. Facilitate regular project team meetings and maintain stakeholder communication

Qualifications:
Minimum 10 years’ experience in Building Services engineering and design
Minimum 5 years post professional registration in mechanical design experience including Construction Management
Strong technical background in engineering
Solid working knowledge of construction implementation processes and standards as well as project management principles
Excellent design skills
Must have MS Office experience

Qualification:
BSc or BEng or BTech in Mechanical Engineering
Registered with ECSA as a Professional Engineer

Only South African Residents or individuals with a relevant South African work permit will be considered.

Contact WIEDAAD LEEMAN on 021 418 1750 , quoting the Ref: CTE025186.

Connect with us on and Register your CV to create a profile and to view all our Engineering recruitment vacancies.

What do you want to search? Keyword Apprenticeship Type Location

Delivered by To be confirmed

FCDO Services

Keeping people and information safe.

Solving unique problems.

Broadening your horizons.

It all matters.

Discover what it takes to design building services for brand-new premises, or maintain an 18th Century embassy that’s perfectly suited to the needs of its occupants. With the chance to be based overseas once qualified or take on ad-hoc projects around the world, we’ll provide you with the skills you need to support our Engineers, Surveyors and Architects across a huge variety of construction projects. Along the way, you’ll discover exactly what you’re capable of as you study for a Level 6 Degree in Building Services Design Engineering, and forge a path to becoming a fully-qualified professional.

You will have opportunities to improve your CAD drawing skills.

You will learn how to use specialist building services design software e.g. IES and Amtech.

You will learn how to work with a multidisciplinary team to deliver the most ambitious projects worldwide.

You may have opportunities to travel overseas.

Before you start your application, check that you meet the minimum entry criteria.

Next, complete your application form - it’s time to let us know why you’d be the perfect person for your preferred role. So complete your application form confirming your current qualifications (or predicted grades).

Don’t forget to complete a letter of application too, showing us how you meet the essential criteria for the programme.

Sit back and wait for us to do our application sift. You don’t need to do anything at this stage. We’ll assess your application against the essential criteria for the programme. We progress applications based on merit and who best fits the relevant criteria.

Complete our assessments. If you’re shortlisted, we’ll ask you to complete some assessments that are aligned to our apprenticeship schemes. These may include psychometric testing and group exercise.

Through to the next stage? We’ll invite you to attend a strengths-based interview. We’ll ask specific questions so that we can get an understanding of your basic knowledge of the subject area for the programme you’ve chosen. Plus, it’s a great chance for us to see your passion for your chosen scheme.

We’ll make a conditional offer and complete the relevant vetting.

You’ll then go through our pre-employment enquiries, including checking your references and asking you to attend a medical assessment. Due to the secure nature of our work, we’ll need to vet you. This means you’ll be background checked for national security purposes.

Building Services Design Engineer Apprentice

As a Trading Fund, our main goals are to provide top quality, good value services for our customers. We’re a trusted, agile and global partner, delivering secure services primarily to the Foreign Commonwealth and Development Office, but also to other parts of government. Our staff are based where they can offer the best support to customers. This includes stationing 130 employees abroad who live and work in regional hubs across the globe from Washington DC to Brussels, Pretoria to Bangkok. Our primary purpose is to support the delivery of the UK’s diplomatic aims for the FCDO using an annual budget of £200m. In total, we have around 1,200 staff, mostly based in Milton Keynes and roughly 200 working from our Offices Whitehall. Working together across a global network we provide secure working environments that protect people, assets and information.

Hanslope Park Hanslope MK19 7BH

Custom

1

03/03/2025

2025-03-16 23:59:59

2025-09-01 00:00:00

To be confirmed

Communication skills, IT skills, Attention to detail, Organisation skills, Customer care skills, Problem solving skills, Presentation skills, Number skills, Analytical skills, Team working, Creativity, Initiative, Patience.

Apply Now

• Degree / Diploma in Mechanical Engineering
• CATIA V5
• 10 years experience in designing models and moulds
• Previous design and / or casting experience in the automotive business will be an added bonus
• Control of mould drawings
• Provide technical support to production

Duties and Responsibilities

• Die and product design, CNC programming for core and cavities.
• Detailed mould component design.
• Responsible for quality of the product. This position has the authority and responsibility to stop a process or shipment when the quality and safety of the product is compromised.
• Project / product management of engineering project.
• Supplying toolroom with accurate information, which includes drawings and CNC programs
• Modeling of new products as 3D solid models using CAD packages such as Pro / Engineer and Catia V5 or NX.
• Ensuring that the final product conforms to customer styling and castability requirements
• Creating tool paths from the 3D solid model for the manufacturing of electrodes and for high speed milling if required
• Liaising with the foundry on the back of spoke metal saver design and as far as the castability of the product is concerned
• Create and manage project plans
• Design review documentation and minutes of meetings
• Design FMEA documentation and minutes of meetings
• Addressing complaints and resolving problems

Please only apply should you meet the minimum requirements. Should you not receive any feedback with regards to your application, within 2 weeks, please consider your application as unsuccessful.

Design Engineer • Johannesburg, South Africa

One of our clients based in Johannesburg South is seeking a Mechanical Engineer with 10 years experience in designing models and moulds. Candidate must have experience in CATIA V5. The Ideal Candidate will have a Degree / Diploma in Mechanical Engineering and Casting as well as CNC programming experience.

Qualifications and Experience

• Degree / Diploma in Mechanical Engineering
• CATIA V5
• 10 years experience in designing models and moulds
• Previous design and / or casting experience in the automotive business will be an added bonus
• Control of mould drawings
• Provide technical support to production

Duties and Responsibilities

• Die and product design, CNC programming for core and cavities.
• Detailed mould component design.
• Responsible for quality of the product. This position has the authority and responsibility to stop a process or shipment when the quality and safety of the product is compromised.
• Project / product management of engineering project.
• Supplying toolroom with accurate information, which includes drawings and CNC programs
• Modeling of new products as 3D solid models using CAD packages such as Pro / Engineer and Catia V5 or NX.
• Ensuring that the final product conforms to customer styling and castability requirements
• Creating tool paths from the 3D solid model for the manufacturing of electrodes and for high speed milling if required
• Liaising with the foundry on the back of spoke metal saver design and as far as the castability of the product is concerned
• Create and manage project plans
• Design review documentation and minutes of meetings
• Design FMEA documentation and minutes of meetings
• Addressing complaints and resolving problems

Please only apply should you meet the minimum requirements. Should you not receive any feedback with regards to your application, within 2 weeks, please consider your application as unsuccessful.

Design Engineer • JHB - Southern Suburbs, Gauteng, ZA