51 Construction Inspector jobs in South Africa

2 days ago Be among the first 25 applicants Get AI-powered advice on this job and more exclusive features. RIG Consulting Inc. is currently seeking a qualified Transportation Construction Inspector Supervisor (TCIS) in the Districts 4 area Luzerne, Wyoming, Susquehanna, Wayne, Lackawanna, and Pike . The base rate may range from $30.00 to $40.00 an hour, depending on qualifications, education, and certifications. RIG offers several additional benefits, such as a Night Safety Incentive and a Long Distance Drive Incentive that can add additional money to your paycheck! Primary Responsibilities will include, but are not limited to: Review plans and specifications during design and/or bidding phase, manage on-site supervision and inspection of construction activities, quality control provisions of contracts, and periodic inspections and tests. Review and evaluate field staff construction progress, quality assurance findings, recommended field and office engineering changes for consistency with contractual provisions, specifications, and cost estimates. Inspect construction operations on roads and bridges to ensure work is done in accordance with contract's special provisions. Observe, investigate, and report on all stages of construction. Record personal and contractor work in field inspection diaries, item quantity books, and sketch/composition books. Analyze the contract plans, specifications, and contract special provisions, and explain the contract requirements to contractor personnel and others making inquiries. Coordinate the planning, design, cost engineering, construction, and environmental considerations for engineering projects of various complexities. Note controversies with contractors and other agencies. Maintain a daily log/diary to adequately document accept/reject work performed. Record incidents of unsatisfactory performance and violations of specifications and regulations. Measure and record progress quantities daily for reviewing contractor monthly invoices. Essential Functions: Travel across various types of terrain. Read, write, and speak English clearly. Input/retrieve information utilizing electronic devices and various software systems. Maneuver safely around moving traffic and equipment. React immediately to hazard warning devices, such as signs, sirens, and alarms. Use required protective equipment and be responsible for its care, storage, and maintenance. Sit, stand, walk, bend, kneel, stoop, reach, crawl, twist, climb; lift and carry up to 50 pounds. Withstand periods of heavy exertion. Travel to inspection sites. Tolerate exposure to noise, outdoors, adverse weather conditions, various plants and insects, and chemicals within SDS limits. Work extended hours in excess of eight hours per shift seasonally and/or be on call beyond normal business hours. Requirements: Minimum of five years of Penn DOT, Pennsylvania Turnpike, or related transportation construction experience. GED or high school diploma required. Degree in Civil Engineering preferred. Required Certifications: Penn DOT Concrete NECEPT Field Tech NICET Level II Preferred Certifications: NECEPT bituminous and concrete ACI CDS Next Gen KAHUA Resumes must include detailed work histories, certification numbers, and expiration dates. Workweek, Benefits, and Pay: This is a full-time, non-exempt position. After a 30-day introduction period, employees receive a comprehensive benefits package including: Paid Time Off (PTO) Bonus program Employer Paid Life & Short-Term Disability Insurance Health Insurance (Medical, Dental, Vision) AFLAC & Long-Term Disability plans Employer Match 401(k) Educational/Training Assistance Travel and Safety Incentives Night shift Incentive Contractual mileage & expense reimbursement RIG Consulting, Inc. is an equal-opportunity employer. All applicants will be considered without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status. #J-18808-Ljbffr

2 days ago Be among the first 25 applicants Get AI-powered advice on this job and more exclusive features. RIG Consulting Inc. is currently seeking a qualified Transportation Construction Inspector Supervisor (TCIS) in the Districts 4 area Luzerne, Wyoming, Susquehanna, Wayne, Lackawanna, and Pike . The base rate may range from $30.00 to $40.00 an hour, depending on qualifications, education, and certifications. RIG offers several additional benefits, such as a Night Safety Incentive and a Long Distance Drive Incentive that can add additional money to your paycheck! Primary Responsibilities will include, but are not limited to: Review plans and specifications during design and/or bidding phase, manage on-site supervision and inspection of construction activities, quality control provisions of contracts, and periodic inspections and tests. Review and evaluate field staff construction progress, quality assurance findings, recommended field and office engineering changes for consistency with contractual provisions, specifications, and cost estimates. Inspect construction operations on roads and bridges to ensure work is done in accordance with contract's special provisions. Observe, investigate, and report on all stages of construction. Record personal and contractor work in field inspection diaries, item quantity books, and sketch/composition books. Analyze the contract plans, specifications, and contract special provisions, and explain the contract requirements to contractor personnel and others making inquiries. Coordinate the planning, design, cost engineering, construction, and environmental considerations for engineering projects of various complexities. Note controversies with contractors and other agencies. Maintain a daily log/diary to adequately document accept/reject work performed. Record incidents of unsatisfactory performance and violations of specifications and regulations. Measure and record progress quantities daily for reviewing contractor monthly invoices. Essential Functions: Travel across various types of terrain. Read, write, and speak English clearly. Input/retrieve information utilizing electronic devices and various software systems. Maneuver safely around moving traffic and equipment. React immediately to hazard warning devices, such as signs, sirens, and alarms. Use required protective equipment and be responsible for its care, storage, and maintenance. Sit, stand, walk, bend, kneel, stoop, reach, crawl, twist, climb; lift and carry up to 50 pounds. Withstand periods of heavy exertion. Travel to inspection sites. Tolerate exposure to noise, outdoors, adverse weather conditions, various plants and insects, and chemicals within SDS limits. Work extended hours in excess of eight hours per shift seasonally and/or be on call beyond normal business hours. Requirements: Minimum of five years of Penn DOT, Pennsylvania Turnpike, or related transportation construction experience. GED or high school diploma required. Degree in Civil Engineering preferred. Required Certifications: Penn DOT Concrete NECEPT Field Tech NICET Level II Preferred Certifications: NECEPT bituminous and concrete ACI CDS Next Gen KAHUA Resumes must include detailed work histories, certification numbers, and expiration dates. Workweek, Benefits, and Pay: This is a full-time, non-exempt position. After a 30-day introduction period, employees receive a comprehensive benefits package including: Paid Time Off (PTO) Bonus program Employer Paid Life & Short-Term Disability Insurance Health Insurance (Medical, Dental, Vision) AFLAC & Long-Term Disability plans Employer Match 401(k) Educational/Training Assistance Travel and Safety Incentives Night shift Incentive Contractual mileage & expense reimbursement RIG Consulting, Inc. is an equal-opportunity employer. All applicants will be considered without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status. #J-18808-Ljbffr

Minimum 3 years of offshore pipeline experience
Minimum 5 years of experience in Oil & Gas Industry
CSWIP 3.1
English - fluent
 
In accordance with the Quality Control Plans, execute the specific inspections on materials, equipment and construction/installation activities on site issuing the relevant Quality Records
Verify welding parameters and consumables during operations
Be aware of welding procedures and qualification
Check welders qualifications
Check the availability and suitability of the welding equipment consumables, pre-heating, welding, heat treatment, bevels, the extent of the repairs made by the various welders (taking any corrective action required), the heat treatment record diagrams
Ensure that all welding, heat treatment and any hardness testing are in compliance with the relevant codes and specifications
Perform pipes line up check, ensuring that all installed pipe/fittings are compliant to the correct specification and that the material is in accordance with the specified material traceability requirements
Carry out visual inspections and issues relevant reports
Orderly collect and manage/check documents certifying tests, controls and inspections documents, ensuring that all welding and testing related records are properly retrievable within the final As Built dossier
In case of subcontractor activities, ensure the correct implementation of the approved Quality Control Plans/Inspection Test Plans, witnessing inspection and collecting relevant

EU, UK:56/28 (56 paid working days followed by 28 unpaid leave days)
TCN: 90/30 (90 paid working days followed by 30 unpaid leave days)
12 hours/day - 7 days/week
Death & Disability + Life Insurance, Medical Insurance and Income protection provided by the company
Prepaid Economy class ticket at beginning, end of CNT and for each work leave rotation cycle

Position: Quality Control Lead

Location: South Africa

Industry: Renewable Energy (Wind)

Type: Full-time | Local Candidates Only

We are recruiting on behalf of a leading renewable energy powerhouse in South Africa. This role is ideal for an experienced Quality Control professional with a strong background in Independent Power Producer (IPP) projects and wind energy.

Key Requirements:

• Minimum of 5 years’ experience working on IPP renewable energy projects
  

• Proven experience in wind energy (5+ years)
  

• Owner’s Engineer experience is highly advantageous
  

• In-depth knowledge of quality control standards and procedures in energy infrastructure
  

• Strong understanding of HSE and compliance frameworks
  

• South African citizenship is required for this position
  

Responsibilities:

• Oversee and implement quality assurance protocols across project phases
  

• Ensure all work complies with project specifications, standards, and regulations
  

• Liaise with contractors, project managers, and engineering teams to maintain quality
  

• Conduct inspections, audits, and manage non-conformances
  

• Report and document findings with clear recommendations
  

How to Apply:

Send your updated CV to

For more roles, visit:

#J-18808-Ljbffr

Join to apply for the Quality Control Inspector role at ExecutivePlacements.com - The JOB Portal

3 days ago Be among the first 25 applicants

Join to apply for the Quality Control Inspector role at ExecutivePlacements.com - The JOB Portal

Get AI-powered advice on this job and more exclusive features.

Recruiter:

West Coast Personnel

Job Ref:

JAAD03062025-1

Date posted:

Tuesday, June 3, 2025

Location:

killarney gardens, Western Cape, South Africa

Salary:

R10,000 per month

SUMMARY:

Quality Control Inspector

POSITION INFO:

Job Summary:

The Quality Control Inspector in the Plastic Injection Moulding Department is responsible for inspecting products, materials, and processes to ensure they meet quality standards and comply with industry specifications. This role includes assessing the quality of incoming materials/products, in-process products, and finished items, ensuring that defective products are identified and corrective actions are recommended.

Responsibilities:

Product Inspection:

• Perform regular quality checks on raw materials, in-process products, and finished goods to verify they meet established quality standards.
  
  

Process Monitoring:

• Monitor and document injection moulding processes to ensure consistency and compliance with specifications.
  
  

Defect Identification:

• Identify defects or deviations from specifications, document findings, and report to the Quality Control Team Leader.
  
  

Documentation:

• Maintain accurate and detailed inspection records, including product samples and any non-conformance findings.
  
  

Testing Procedures:

• Conduct and document standard tests, such as dimensional checks, visual inspections, and functional tests, using precision measuring equipment (e.g., gauges).
  
  

Continuous Improvement:

• Provide feedback on potential areas for improvement to production teams and support corrective action implementation.
  
  

Collaboration:

• Work closely with production and engineering teams to address quality issues and implement solutions.
  
  

Training Support:

• Assist in training production staff on quality standards and inspection procedures as required.
  
  

Safety Compliance:

• Ensure compliance with safety and health regulations during inspections and handling of materials.
  
  

Any other ad-hoc task as given to you by your line-manager

Requirements:

• Matric certificate or equivalent
• Minimum 1 year of experience in quality inspection or manufacturing (injection moulding preferred)
• Familiarity with injection moulding processes and common plastic defects (e.g., flash, sink, warping)
• Ability to read and interpret technical drawings, part specifications, and inspection standards
• 1 year experience in the use of precision measuring tools, e.g.
• Vernier callipers
• Micrometres
• Height gauges
• Go/no-go gauges
• Basic understanding of quality standards (e.g., ISO 9001) and inspection procedures
• Strong attention to detail and ability to spot visual and dimensional defects*
• Physical Requirements:
• Ability to stand for long periods
• Lift parts or tools
• Comfortable working in production floor environment (hot, noisy, etc.)
• Basic computer skills for data entry and reporting*
• Good communication skills to report findings and work with production staff
  
  
  
  

Seniority level

• Seniority level Entry level

Employment type

• Employment type Full-time

Job function

• Job function Quality Assurance
• Industries Advertising Services

Referrals increase your chances of interviewing at ExecutivePlacements.com - The JOB Portal by 2x

Sign in to set job alerts for “Quality Control Inspector” roles.

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

#J-18808-Ljbffr

Summary:

Perform quality control checks on products before processing to ensure compliance with company standards and supplier requirements. Conduct inspections on all item being processed and address defects, deviations, or non-conformities.

Key Responsibilities:

1. Inspect products, materials before processing stage.
2. Ensuring daily demand targets of parcels being processed are met.
3. Identify and isolate non-conforming products or materials. Notify production staff and manager of quality issues.
4. Collaborate with production teams to resolve quality problems.
5. Maintain a clean and organized work environment.

Requirements:

1. High school matric.
2. 1-2 years of warehousing operations experience and knowledge of quality control principles.
3. Analytical and problem-solving skills. Attention to detail and accuracy is crucial.
4. Effective communication and teamwork skills. Ability to work in a fast-paced environment.
5. Basic computer skills (e.g., data entry, reporting).

#J-18808-Ljbffr

Job Specification: Quality Control Officer

Position Overview:
We are seeking a highly motivated and detail-oriented individual to join our team as a Quality Control Officer. To ensure that all products and processes in the power cord manufacturing environment meet the highest quality standards and are compliant with the company’s quality management system (QMS). The QA Inspector is responsible for conducting in-process inspections, random testing, system audits, and ensuring corrective and preventive actions (CAPA) are implemented and documented.

Core Activities:

1. Quality Inspections and Testing:

• Conduct regular inspections of supplier raw materials and at various stages of the manufacturing process to ensure compliance with quality standards and specifications. Perform testing and measurements using calibrated equipment to verify product functionality, safety, and reliability. Record and document inspection results, test data, and any deviations from quality standards.

1. Quality Control Procedures:
   • Develop, implement, and maintain quality control procedures and work instructions for manufacturing processes. Establish sampling plans, acceptance criteria, and inspection methods to ensure consistent product quality. Monitor adherence to quality control procedures and provide guidance to production teams as needed.
2. Non-Conformance Management:
   • Identify and document non-conformities, defects, or deviations from quality standards during inspections and testing. Investigate root causes of non-conformities and implement corrective and preventive actions to address quality issues. Track and monitor the effectiveness of corrective actions to prevent recurrence of non-conformities.
3. "Continuous Improvement Initiatives:
   • Identify opportunities for process improvements and efficiency gains in quality control procedures and manufacturing processes. Participate in continuous improvement projects and quality improvement teams to enhance product quality and reduce defects. Use quality tools and methodologies such as Six Sigma, Lean Manufacturing, and Root Cause Analysis to drive process improvements."
4. Regulatory Compliance:
   • Ensure compliance with regulatory requirements and standards related to product quality, safety, and environmental protection. Stay updated on industry regulations, standards, and quality management system requirements to ensure adherence to all applicable requirements. Collaborate with regulatory affairs and compliance teams to address any quality-related regulatory issues or requirements.
5. Documentation and Reporting:
   • Maintain accurate records and documentation of quality control activities, inspection results, test data, and non-conformities. Prepare quality reports, trend analyses, and performance metrics to track quality performance and communicate findings to management and stakeholders. Ensure documentation complies with regulatory requirements and internal quality management system (QMS) standards.

Core Decisions:

1. Acceptance of Products:
   • Decide whether to accept or reject product batches based on quality inspection results and adherence to specifications.
2. Implementation of Corrective Actions:
   • Determine appropriate corrective actions to address non-conformities, defects, or deviations from quality standards identified during inspections and testing.
3. Approval of Supplier Quality:
   • Decide whether to approve or reject suppliers based on their ability to meet quality requirements and performance standards.
4. Changes to Quality Control Procedures:
   • Decide whether to update or revise quality control procedures, work instructions, or sampling plans to improve effectiveness and efficiency.
5. Investigation of Quality Incidents:
   • Determine the root causes of quality incidents, complaints, or customer returns and decide on appropriate corrective and preventive actions.
6. Resource Allocation for Quality Improvement:
   • Decide on resource allocation for quality improvement initiatives, such as training, equipment upgrades, or process improvements. Decide on actions to ensure compliance with regulatory requirements, standards, and quality management system (QMS) requirements.

Core Capabilities:

1. Technical Competence:
   • Understanding of manufacturing processes, materials, and specifications. Proficiency in using quality control tools, equipment, and testing methods relevant to electrical components.
   • Knowledge of industry standards and regulations related to electrical product safety and quality.
2. Analytical Skills:
   • Ability to analyze data, test results, and quality metrics to identify trends, patterns, and areas for improvement.
3. Problem-Solving Abilities:
   • Aptitude for identifying root causes of quality issues and implementing effective corrective and preventive actions.
   • Capacity to troubleshoot quality-related problems and make timely decisions to address them.
4. Attention to Detail:
   • Meticulous attention to detail is crucial for conducting thorough inspections, testing, and documentation of quality control activities.
   • Ability to identify even minor deviations from quality standards and specifications.
5. Communication Skills:
   • Effective communication skills, both verbal and written, to convey quality expectations, report findings, and collaborate with cross-functional teams.
6. Quality Management System (QMS) Knowledge:
   • Familiarity with quality management principles and practices, including ISO 9001 standards and quality assurance methodologies.
   • Understanding of QMS requirements, documentation standards, and procedures for maintaining compliance.
   • Ability to ensure compliance with regulatory requirements and maintain up-to-date knowledge of industry regulations.
   • Commitment to continuous improvement and quality excellence through the implementation of quality improvement initiatives and best practices.
7. Teamwork and Collaboration:
   • Ability to collaborate effectively with production teams, engineers, quality assurance personnel, suppliers, and other stakeholders to achieve quality objectives.

Requirements:

• Quality Management or Quality Control qualification (National Diploma or higher preferred)
• Minimum 5 years of experience in the cable or electrical component manufacturing industry
• In-depth knowledge of cable manufacturing processes and quality requirements
• Proficient in the use of measurement tools (multi-meters, callipers, hi-pot testers, micrometres, etc.)
• Familiar with ISO standards (e.g., ISO 9001), Six Sigma, and Kaizen methodology
• Strong analytical and root-cause analysis skills
• Competent in drafting technical reports and documentation
• High attention to detail
• Ability to work independently and make objective decisions.
• Strong written and verbal communication skills
• Excellent organizational and time management abilities
• Uncompromising integrity and commitment to quality
• Initiative-taking, assertive, and able to stand firm under pressure.

#J-18808-Ljbffr

Join to apply for the Quality Control Supervisor role at ExecutivePlacements.com - The JOB Portal

3 days ago Be among the first 25 applicants

SUMMARY: Our client based in Johannesburg specializes in packaging for the food and beverage, pharmaceutical, household, and personal care markets.

Recruiter: Stratogo

Job Ref: HQ000964/pn

Date posted: Saturday, November 23, 2024

Location: Johannesburg, South Africa

Salary: 29165.00 Monthly

Position Info:

• Purpose of the Role: To ensure products manufactured conform to quality, safety, and reliability standards
• Role: Quality Control Supervisor
• Industry: Manufacturing - Packaging
• Qualifications: Matric, NQF 4 - Supervisory Management Qualification, Certificate in Quality Control
• Skills: People management skills, Attention to detail, Problem solving skills
• Competencies: Technical knowledge of process, inclusive of equipment and raw materials; Relevant quality system and certification; Diversity Management; Conflict Management

Quality Control Planning:

• Develop and implement quality control procedures and protocols to ensure compliance with company standards and regulatory requirements.
• Conduct regular audits
• Develop and maintain quality control records, including documentation of test results, inspection reports, and corrective actions taken.

Personnel Management: Responsible to lead, motivate and train subordinates

Customer Service: Responsible for customer inquiries regarding product quality and providing resolutions to customer complaints.

Reporting and Administration

Health and Safety

Food Safety Systems Certification - FSSC

Self Development and Growth

Seniority level

• Mid-Senior level

Employment type

• Full-time

Job function

• Quality Assurance

Industries

• Manufacturing - Packaging

#J-18808-Ljbffr

The Home Admissions Advisor will manage the sales and marketing processes of the home, ensuring the effective daily operation of the Sales & Marketing Department whilst meeting and exceeding budget targets, filling the home with the agreed client base, and maximizing revenue.

This role involves working within a team and very closely with the General Manager.

You will need to be decisive, self-motivated, proactive, flexible, and adaptable.

Confident and enthusiastic with a desire to excel in all areas, you must possess the ability to prioritize your workload and work under pressure.

The ability to communicate and manage interpersonal relationships, including influencing skills, is essential.

#J-18808-Ljbffr