97 Cnc Machine Operator jobs in South Africa

CNC turning operator needed

Understand drawings

must be able to read a mic

must be able to read a vernier

must be willing to work overtime

email your cv to:

Job Type: Full-time

Pay: R8 000,00 - R13 000,00 per month

Work Location: In person

We are looking for young men to be trained up as Production Operators to join our team. The suitable candidate will have the following attributes:

* Reliable

* Trustworthy

* Honest

* Positive Attitude

* Attention to Detail

* Read and Write

* Sober habits

* Great timekeeping & attendance

And must have:

* Grade 10 min but preferably Matric

* Contactable References

* No criminal record

*STRONG ADMIN SKILLS

Their duties will be as follows:

* Weighing up jobs

* Canning jobs

* Assisting in the factory where necessary

* Despatch Duties

* Any adhoc production operator duties

Job Type: Full-time

Pay: R5 000,00 - R7 000,00 per month

Our company requires a candidate with a technical background to meet the following criteria:

Minimum Requirements

• Grade 12 (Matric)
• 3-5 years' bending operating experience is a requirement.
• Technical background
• Knowledge of bending machines, geometric dimensions and tolerances
• Accuracy and attention to detail
• Able to work shifts.
• Own transport

Key Responsibilities

• Read and interpret drawings to comprehend work orders.
• Plan machining activities and bear in mind the work orders, priorities and machine efficiency.
• Setup and operate the bending machine to bend sheet metal structural shapes to angel or contour specified by work order, drawings, templates or layout.
• Select and bolt holding clamp, die block, and guide clamp to machine.
• Confirm position of clamps and end stops on machine to set specified locations of bends.
• Position work piece against end stop.
• Check stock inventory to ensure that the appropriate material is available.
• Safely load and unload raw materials into the machinery.
• Meet tolerance environments of the machine by setting gauges and measuring instruments appropriately.
• Isolate any piece that may not conform to the standards of the work order. Parts must be quarantined, Supervisor to be informed and noted in bending report.
• Perform preventative and regular maintenance on machines, equipment and tools used in all processes as directed.
• Ensure that all machines and tooling are lubricated.

Job Types: Full-time, Permanent

Pay: From R10 000,00 per month

Application Question(s):

• Are you located in CAPE TOWN or Surrounding areas?

Experience:

• BENDING MACHINE OPERATOR: 3 years (Required)

Location:

• Montague Gardens, Western Cape (Required)

A well known company is looking for a CNC Lathe and Milling Machine Operator

Responsibilities

• Machine operation: Programming CNC lathes and milling machines to produce parts according to technical drawings and specifications.
• Monitoring: Continuously monitor machine operations, making adjustments to speed and settings to ensure accuracy and efficiency.
• Quality control: Inspect finished products using precision measuring tools (like Vernier Calipers and micrometers) to ensure they meet required quality standards and specifications.
• Setup and maintenance: Perform routine preventative maintenance, cleaning, and troubleshooting on the machines.
• Documentation: Maintain accurate production records and logs.
• Collaboration: Work with engineers, senior operators, and quality control teams to optimize processes and improve efficiency.
• Training: Training other employees on set up and operating CNC Lathe and milling machine

Skills and qualifications

• Proficiency in operating both lathe and milling machines (manual and CNC).
• Ability to read and interpret mechanical blueprints, technical drawings, and specifications.
• Knowledge of materials, fits, and tolerances.
• Proficiency with precision measuring tools such as vernier calipers and micrometers
• Soft skills:
• Strong attention to detail and precision.
• Problem-solving and troubleshooting abilities.
• Ability to work independently and as part of a team.
• Good communication and documentation skills.
• Education and experience:
• High school diploma or equivalent.
• Formal training in machining or a related field is preferred.
• 3-5 years prior experience working with machine shop tools and equipment is essential.

Job Types: Full-time, Permanent

Work Location: In person

Company Description
CFAM Technologies, a manufacturer of world-class food and feed processing equipment is looking for a dedicated Rolling and Bending Machine Operator. We are passionate about food security and enable communities to utilize locally produced agricultural products to support food security through extrusion technology. We are looking for an experienced, passionate and motivated individual to join our team.

Job Description

• set-up, operate roll machine, bending machine and guillotine cutter machine.
• measure dimensions of sheet metal or material to be rolled/bend/cut and check for quality defects.
• interpret cutting, rolling and bending drawings to determine set-up specifications, work sequence and product dimensions.
• adjust machine and/or set-up according to drawing instructions.
• measure dimensions of completed products to verify conformance to specifications before sending them to the next fabrication process.
• conduct regular maintenance on the machinery and ensure proper functioning.

Qualifications

• Grade 12/N4 Engineering Qualifications or equivalent
• Draughting qualification an added advantage
• Residing around Potchefstroom is an added advantage.
• 2-3 years working experience with the roll, bend and cutting machines.

Additional Information

Key skills required:

• knowledge of workshop practices
• knowledge of basic machine shop tools and measuring equipment
• basic knowledge of materials in a fabrication environment
• interpretation of drawings
• Ability to work overtime from time to time.
• High quality of work is carried out and ability to meet deadlines.
• Ability to perform under pressure.
• Team orientated: collaborative and cooperative.
• Attention to detail orientated: quality and precision focused.
• Closing: 19 September 2025.
• Start: 01 October 2025

Company Description

CFAM Technologies, a manufacturer of world-class food and feed processing equipment is looking for a dedicated Rolling and Bending Machine Operator. We are passionate about food security and enable communities to utilize locally produced agricultural products to support food security through extrusion technology. We are looking for an experienced, passionate and motivated individual to join our team.

Job Description

• set-up, operate roll machine, bending machine and guillotine cutter machine.
• measure dimensions of sheet metal or material to be rolled/bend/cut and check for quality defects.
• interpret cutting, rolling and bending drawings to determine set-up specifications, work sequence and product dimensions.
• adjust machine and/or set-up according to drawing instructions.
• measure dimensions of completed products to verify conformance to specifications before sending them to the next fabrication process.
• conduct regular maintenance on the machinery and ensure proper functioning.

Qualifications

• Grade 12/N4 Engineering Qualifications or equivalent
• Draughting qualification an added advantage
• Residing around Potchefstroom is an added advantage.
• 2-3 years working experience with the roll, bend and cutting machines.

Additional Information

Key skills required:

• knowledge of workshop practices
• knowledge of basic machine shop tools and measuring equipment
• basic knowledge of materials in a fabrication environment
• interpretation of drawings
• Ability to work overtime from time to time.
• High quality of work is carried out and ability to meet deadlines.
• Ability to perform under pressure.
• Team orientated: collaborative and cooperative.
• Attention to detail orientated: quality and precision focused.
• Closing: 19 September 2025.
• Start: 01 October 2025

PFG is the leading manufacturer of float glass in Southern Africa, as well as laminated glass, mirrors, and sealant products. The company produces tons of float glass products per annum, supplying into both domestic and international building and automotive industries.

Main Job Purpose

• Supply raw materials (glass and vinyl) to the production line.
• Flop glass and feed the glass into the washing machines
• Assemble the glass and vinyl
• Off-load the assembled laminate onto a cage
• Put finished product into stock
• Load finished product for delivery to customers – internal and external
• Maintaining cleanliness in all sections of work

Minimum Qualifications Required

• School – Mandatory Grade 12
• Crane license

Job Related Experience

• 1 year experience in manufacturing environment

Job Related Skills

• Problem solving skills
• Quick thinking

Interpersonal Related Skills

• Organising skills
• Communication skills
• Excellent interpersonal skills
• Ability to work in a team
• Ability to follow written and verbal instructions

PHYSICAL ATTRIBUTES

• Medically fit

SCOPE OF RESPONSIBILITY AND AUTHORITY

• Participate in WCM activities
• Cleaning of the line
• Reporting deviations in raw material
• Reporting deviations in equipment
• Reporting deviations in the process
• Reporting incidents and accidents that can or could have caused damage to property or people

PG Group, and its subsidiaries, are committed to the principles of employment equity and as such are equal opportunity employers. Qualified applicants who apply for any vacancies will be considered with due consideration based on of fairness and equity. Factors such as race, ethnicity, religion, sexual orientation, gender identity, national origin or disability are not consider exclusively and are not determinative of any appointments made by PG Group or its subsidiaries. Requisition ID: 3085

Overview
About PepsiCo
PepsiCo products are enjoyed by consumers more than one billion times a day in more than 200 countries and territories around the world. PepsiCo generated more than $79 billion in net revenue in 2021, driven by a complementary beverage and convenient foods portfolio that includes Lay's, Doritos, Cheetos, Gatorade, Pepsi-Cola, Mountain Dew, Quaker, and SodaStream. PepsiCo's product portfolio includes a wide range of enjoyable foods and beverages, including many iconic brands that generate more than $1 billion each in estimated annual retail sales.

Guiding PepsiCo is our vision to Be the Global Leader in Beverages and Convenient Foods by Winning with PepsiCo Positive (pep+). pep+ is our strategic end-to-end transformation that puts sustainability and human capital at the center of how we will create value and growth by operating within planetary boundaries and inspiring positive change for planet and people. For more information, visit

Responsibilities
Job Overview:
The purpose of a Production Operator in bread making is to ensure the efficient, safe, and consistent production of high-quality bread products by operating machinery, following recipes and production schedules and adhering to food safety and hygiene standards.

• Sort product by categories for different batches
• Ensure all packaging, damages, stock processes are followed (SOPs)
• Communication with supervisors regarding an issue on shift
• Record each batch number correctly per ingredient on the mixing sheet
• Adhere to food safety regulations to minimise risk to the product

Qualifications

• Minimum: NQF 4 or Grade 12 or similar relevant qualification
• 1-2 years of manufacturing experience

"PepsiCo is an Equal Opportunity Employer in line with the Employment Equity Act"

We are seeking a skilled
Production Line Machine Operator
to join our manufacturing team. The ideal candidate will be responsible for operating, maintaining, and troubleshooting production machinery to ensure efficient workflow and high-quality output. This role requires attention to detail, mechanical aptitude, and adherence to safety and quality standards.

Duties & Responsibilities

• Operating Equipment
  : Manage machines and equipment along the production line, ensuring proper functionality.
• Monitoring Process: S
  upervise operations to detect and troubleshoot issues quickly.
• Quality Control
  : Inspecting finished products to make sure they meet specifications and standards.
• Maintaining Machines
  : Performing routine maintenance and reporting faults or breakdowns.
• Assembly Work
  : Assemble parts and contribute directly to the repair process.
• Following Safety Protocols
  : Adhering to workplace safety rules and keeping the environment hazard-free.
• Record Keeping
  : Documenting production data, machine performance, or any incidents.
• Experience in a Bearing environment will be an advantage

Education & Experience:

• High school diploma or equivalent (GED).
• Technical or vocational training in machinery operation or a related field is a plus.
• Previous experience as a machine operator or in a manufacturing/production environment preferred.

Technical Skills:

• Knowledge of machine operations, troubleshooting, and maintenance.
• Ability to read and interpret technical manuals, blueprints, or schematics.
• Familiarity with safety procedures and quality control standards in a production setting.
• Basic math and computer skills for recording production data.

Soft Skills:

• Strong attention to detail and problem-solving abilities.
• Ability to work efficiently in a fast-paced, team-oriented environment.
• Good communication skills for coordinating with team members and supervisors.
• Adaptability and willingness to learn new machinery and processes.

Physical Requirements:

• Ability to stand for long periods and perform repetitive tasks.
• Strength to lift and move materials or products as required (typically up to 50 lbs).
• Comfortable working in environments with noise, heat, or cold, depending on the industry.

Package & Remuneration

• Contract:
  Immediately - June 2026 Months
• Salary:
  R55 per hour
• Location: Jet Park Gauteng

Only applicants that meet the minimum requirements will be considered

Interested?

If interested, please
apply directly through
email us directly at

N.B If emailing us directly
,
remember to insert
"Production Line Machine Operator"
in the email
subject line
, for consideration, and state which area you are applying for.